-
Anonymous users2024-01-24First of all, there are several types of furniture, including panel, solid wood, softwood, wrought, and plastic. Different materials also have different styles, and the spraying process of different styles is somewhat different. Take modern Chinese solid wood furniture as an example, the painting process includes:
Primer - coarse grinding - primer - primer - fine grinding - color repair - topcoat. In terms of craftsmanship, the primer requirements are comparative, and the technical content is also low, so it is basically only used to be as smooth as possible, less paint, and moderate thickness; The color repair requirements are relatively high, the color should be uniform, the light color of the gun is slower, the color of the heavy place is faster, the technical requirements of the topcoat are also very high, because it is the last process, it must be smooth, no paint, the thickness must be moderate, different from the primer, a little flaw can also be polished off the second and third spray.
The surface leveling of non-solid wood furniture depends on the final demand, if it is a colored water-mixed paint, you can use putty primer, if it is a varnish, you can use transparent putty leveling, both methods require a smooth surface, no oil or waxy dirt, and then after drying, you can apply a finishing coating (water-based or oil-based can be applied), the emphasis here is on the use of putty and transparent putty as filler instead of using general water-based putty is mainly to consider that the foundation is firmer, and will not fall off too softly, while putty and transparent putty itself dries quickly, the hardness is also high, more convenient for practical operation, and it is a practice that can stand the test of timeļ¼Since you only talked about the problem of grassroots leveling, you will ignore the finishing paint process here and do not explain. If you don't know anything, you can continue to ask. . .
There are two kinds of spray paint and spray plastic, spray paint is direct spraying and baking of paint, and spraying is spraying and baking after blending plastic powder; In contrast, the painting process is relatively simple and the brightness is higher. The spray coating of spraying has better adhesion and should not fade.
The process of spraying paint and painting (1) Painting: Applying paint to the surface of an object with a manual brush is called painting. Its characteristics are: >>>More
How to say, in general, if the wood you use is good, and the carpentry is good, at most you can repair the color lightly, and then it is on the primer topcoat, of course, between the two paints. >>>More
This is mainly caused by the unclean construction environment and the paint itself, in addition to the quality of the paint and the method of spraying also has a great impact, there is basically no way to remedy this problem, can only polish off and re-spray, spraying paint must be proportionally deployed, the temperature is about 25 degrees is the best, the room is free of dust as much as possible, find a professional painter to paint. The level of painters varies greatly, and the cheap ones that are found casually often do not outweigh the losses.