-
Anonymous users2024-01-24The main thing is that the setting of the water tank and the pipe diameter of the sewage outlet are the same, the specific is to look at the model, not to say that the less water the better, otherwise the sewage effect will be greatly reduced, you look at the relevant national standards for toilet flushing.
Water-saving toilets are water-saving, but due to the problem of small caliber and small water volume, water-saving toilets are easier to block! In terms of living comfort, it is better not to buy a water-saving toilet.
It means the amount of water. The flush button has two parts. A larger one indicates a large flush volume (6 L at a time), and a smaller one indicates a small flush volume (3 L at a time). >>>More
This indicates that the drain fittings in the toilet are not well adjusted, and it does not necessarily mean that it is an inferior toilet. The adjustment is very simple, you open the toilet tank lid, find the small adjustment cup of the drain valve, and pull it up a little bit.
The appearance is very generous, one-piece molding, the shopping guide said that the water tank and the commode are a whole, which can ensure that 100% of the water tank will not leak when flushing; In addition, such a monolithic structure can withstand high-intensity pressure without cracking. >>>More
After flushing, the water level is caused by the slow fall of the cover that closes the opening in the water tank, after pressing the button, the cover is opened, the water is left, the water tank water flows out, the cover will be slowly closed, at this time, the remaining water is still left, to adjust the slider of the height of the cover to be lowered, in addition, on the cover surface, add a lead block or tie a point of steel wire, in order to speed up the speed of the fall of the cover.