One optical modem has two routers, the optical modem is in the living room, the dark wire is connect

Updated on Living room 2024-06-24
1 answers
  1. Anonymous users2024-01-24

    1. All one, line connection method.

    Optical modem LAN port - > network cable - > main router WAN port.

    First, the conventional connection method (secondary router).

    Pros: The chance of a router crash is relatively low.

    Line: Main router LAN port - > network cable - > slave router WAN port 2, unconventional connection method (slave router as wireless switch).

    Advantages: Two wireless networks in the same network, can easily share the connection.

    Line: Main router LQN port - > network cable - > from the router LAN port II, the settings of the two routers.

    1st and 2nd level router connection.

    1. The main router is set as usual.

    2. From the router settings.

    The WAN port connection mode is dynamic IP mode.

    The LAN port is set to be different from the IP segment of the primary router.

    Second, connect from the router as a wireless switch.

    1. Do not connect the network cable from the router to the main router first.

    2. From the router settings.

    The WAN port is set to dynamic IP mode.

    The LAN port is set to be different from the IP segment of the primary router.

    The DHCP function is turned off.

    3. Reboot from the router.

    Just plug and unplug the power cord from the router).

    4. Connect the LAN ports of the two routers with network cables.

Related questions
There is an optical modem and a router in the living room, but the signal in the bedroom is not good
4 answers2024-06-24

Method 1: Antenna gain.

Normally, it's okay for a wireless router to pass through one load-bearing wall, and it's okay to pass through two load-bearing walls with better performance. >>>More

Mobile optical brazing 20 megabytes, computer, optical modem, router in the living room, want to put
2 answers2024-06-24

NOTE THIS ... It still depends on whether the wireless router can cover all (range). No matter how much you can get, you don't need to buy a wireless router anymore.

The light modem and router are in the living room, but the bedroom is not connected, the wifi signal
1 answers2024-06-24

Now the new router can be used directly by connecting it, the bedroom network cable enters the WAN port, and the computer is connected to the LAN port.

The optical modem and router are in the living room, the computer is in the bedroom, and the bedroom
1 answers2024-06-24

Now there is a kind of power cat, which transmits network signals through power lines, and can be used under the same meter. Just buy a pair of power cats.

Light Cat in the living room computer in the bedroom, router directly connected to the computer when
1 answers2024-06-24

I don't understand,When the router is directly connected to the computer, you can access the Internet, but you can't assign an IP when you connect the router to the computer with the cat? So when your router is directly connected to the computer and can access the Internet, is the router not connected to the cat?