-
Anonymous users2024-01-23Is it a shared exhaust tunnel?
If so, only open the ceiling and install a one-way valve where it leads to the air duct. It's simple to make :
Make a thin plate slightly smaller than the size of the tuyere, hang it on the indoor side of the tuyere, and ensure that the hand gently pushes it into the side of the tuyere, and it will return to its position after letting go. Then make a frame on the outside of it and fix it on the wall. The outer diameter of the frame is larger than the tuyere, and the inner diameter is smaller than the tuyere.
It is used to block the baffle and prevent it from moving indoors when it is exhausted in other homes.
Because there are air ducts and the outside figure it out. When there is wind, it will be caused by the flue and air duct blowing into the room.
If it is a common smoke exhaust pipe, you can add a check valve to the flue of your home.
On the whole, 3 meters is not low, mainly depending on what shape your ceiling is and how to match. Now the rough room of the residential real estate is also meter high, and it can also be used for ceiling.
The height of the kitchen ceiling is generally to meters. Your house is not too high, and if the ceiling is designed too low, it will cause people to have a strong sense of oppression when the sky falls, causing negative psychological effects. The floor of our house is not high, and the installation is an AIA ceiling, which is partially installed, forming a high and low split-level. >>>More
Above the top surface will generally not be putty, below the top surface, in the bathroom needs to do a good job of waterproof treatment, and then then tiles, the kitchen can not do waterproof treatment. Even if there are no tiles on the wall, there is no need for putty on the wall above the top surface.