What should I do if the ceiling is moldy?

Check the ceiling or corner of the house for water seeping out, find the cause of the mold on the ceiling, if it is caused by water seepage or high humidity in the room, find a way to solve these problems.

You can also use a professional wall mold remover, which can completely kill the wall mold in a short time, and at the same time, you can also change the wall structure of the corresponding part to prevent the growth of wall mold.

You can first wipe it with a cloth soaked in disinfectant alcohol, if it is not too serious, you can remove the mold by wiping it two or three times, and another way to remove mold is to use 84 disinfectant, but it is easy to irritate the skin, so remember to wear rubber gloves when using it, and wash it with water.

There are three necessary prerequisites for moldy ceilings: the right temperature, humidity above 80, and mold spores. Eliminating any of the premises will not become moldy.

Look at the temperature first, the temperature that the human body feels comfortable is also the temperature at which mold grows, there is no way, it can't be changed;

Look at the mold spores, they are very small, fluttering in the wind, doors and windows can't stop it, they can easily enter your room, and they can't get rid of it;

Finally, there is the humidity, which he needs above 80, which is exactly the humidity that we hate, and there are now many ways to reduce the humidity without causing us discomfort.

When the sun is shining, open the windows and let in a lot of air.

On a rainy and wet day, close the window and turn on the air conditioner and turn it to dehumidification mode. In summer, you don't have to worry too much, as long as the air conditioner is turned on, the humidity will naturally drop, and sometimes you need to add some water to volatilize.

The door of the wardrobe should be closed like a refrigerator, and then put some desiccant.

It is also important to check the ceiling, walls and floor of the house for water seepage, and think about eliminating it.

With these measures in place, you can say goodbye to mold.

There is also the use of professional wall mold remover, which can completely kill wall mold in a short time, and at the same time, it can also change the wall structure of the corresponding part to prevent the growth of wall mold.

Find the cause of the mold first, solve the root problem, and the mold can be freshly whitened or sanded with sandpaper.

My family has also had moldy ceilings before, and there are many reasons for moldy ceilings, the main reasons are as follows:

First, there is a water leak in the bathroom of your upstairs house, which penetrates into the canopy of your bathroom and causes the canopy of your bathroom to become moldy.

Second, to eliminate water leakage, which is the mold caused by the material used in the decoration of the bathroom in your home without completely drying out.

If it is determined that the above house is leaking after on-site inspection, the people above will find them to do waterproof treatment, which can completely eliminate the mold phenomenon.

It is recommended that you use aluminum gusset ceilings in bathrooms and kitchens, generally speaking, aluminum gusset ceilings are not easy to mold. In addition, you should open the windows frequently to keep the room dry.

First, there is a water leak in the bathroom of your upstairs house, which penetrates into the canopy of your bathroom and causes the canopy of your bathroom to become moldy.

Second, to eliminate water leakage, which is the mold caused by the material used in the decoration of the bathroom in your home without completely drying out.

If it is determined that the above house is leaking after on-site inspection, the people above will find them to do waterproof treatment, which can completely eliminate the mold phenomenon.

It is recommended that you use aluminum gusset ceilings in bathrooms and kitchens, generally speaking, aluminum gusset ceilings are not easy to mold. In addition, you should open the windows frequently to keep the room dry.

The main cause of mold on the ceiling.

Now indoor coatings, most of the water-soluble or emulsion and other polymer materials as binders or as the main film-formers, the thickeners used in cellulose or polyacrylates and other water-soluble substances, these are the objective conditions for mold reproduction, especially in the season of mildew rain, indoor humidity is heavy, in such a certain temperature and humidity environment, the ceiling is easy to appear mildew, but also particularly easy to collect into a piece.

2.Major molds and hazards.

Rhizopus, Aspergillus niger, and Penicillium can all grow. After the coating is formed, mold will also make the surface mildew turn green or black, and even make the coating film fall off, which brings economic losses to manufacturers and users.

3.Anti-mildew measures for coatings.

Use a cloth or broom to clean the ceiling of mold;

Spray the ceiling evenly with anti-mold agent;

Repainted, in the stucco paint, it is recommended to add antifungal agents.