Is there a clear national regulation on the height between the bottom of the solid wood door and the

Updated on Solid wood 2024-05-24
2 answers
  1. Anonymous users2024-01-24

    See the additional content below, the provisions in the national standard. The content of the original reply between the two lines of "=====" has not been modified.

    There is no national standard for the height between the bottom of the solid wood door and the floor. It is specified in the industry standards listed below:

    The People's Republic of China material management industry standard WB T 1024-2006 wooden door The seam limit of the wooden door specified in this standard is shown in the following table:

    The following are amendments and additions to the foregoing. "The height between the bottom of the solid wood door and the floor" is actually a national standard. Your own negligence caused the mistake in the above reply.

    The National Standard of the People's Republic of China GB T 29498-2013 Wooden Doors and Windows The seam limits for wooden doors specified in this standard are shown in the following table:

    Compared with the above-mentioned local standards, the provisions of this national standard are slightly relaxed.

  2. Anonymous users2024-01-23

    Yes, it depends on whether the ground is installed when installing and measuring the keel installation of solid wood, or tile installation, the normal door and the ground are 8 mm, the gap between the door and the ground is too large and not soundproof, there is wind to enter, the door and the ground gap is too small There will be problems, and the door and the floor have the same deformation will affect the door is not good to open.

Related questions
3 answers2024-05-24

The difference between the two. Solid wood doors are also called solid wood composite lacquer doors. >>>More

1 answers2024-05-24

1. Solid wood door refers to the material of making wooden door is taken from the forest of natural logs or solid wood laminated timber (also known as solid wood finger joint material or solid wood tooth joint material), after drying, blanking, planing, tenoning, drilling, high-speed milling, assembly, grinding, painting and other processes of scientific processing. >>>More

3 answers2024-05-24

In the impression of many people, buying a solid wood door must be a solid wood door made of large pieces of wood of the same material, such as a solid wood door of cherry wood, but in fact, the solid wood door may not be made of the same material. Now let's take a look at the difference between solid wood doors and pure solid wood doors! >>>More

2 answers2024-05-24

Doors containing MDF can also be called solid wood doors; The whole door made of log or solid wood finger jointed board does not contain any MDF, laminate, etc., which is called a solid wood door. Oppai wooden door was chosen.

3 answers2024-05-24

[Q&A].

Cracks in the paint and solid wood doors on the solid wood door must be reasonable for consumers to protect their rights, please repair the relevant wooden door manufacturers after-sales service personnel, if you are not satisfied with the repair, you can ask for corresponding compensation for losses, in the next time you buy a solid wood door, you must see this clearly, pay attention to the problem of edge banding. >>>More