-
Anonymous users2024-01-24Three sockets and five holes can be connected in parallel, the wire is BV4 flat, that is, the copper wire, the lamp line is single, the square is found in the electrical box, the circuit breaker of DZ4732C the two Ps is connected to the original wire, the red line is connected to the red line, the blue wire is connected to the blue wire, and the two-color wire (yellow and green wire) is connected
Earthing. The light line is connected to the circuit breaker of 1P, and the blue line is connected to work zero, and a total of 5 lines are taken, three trees are 4 flat, and two trees are flat.
The zero two-color grounding of the live wire (N) printed on the back of the socket is hoped that you will succeed.
-
Anonymous users2024-01-23å×L)½ÓN)½Ó
The wires of the sockets are drawn from another socket that is close to each other, and so on, the first one is connected to the main switch, that is, as long as the middle socket is not in good contact, the socket behind it will have problems, which is the case with the landlord's house. In this way, you have to analyze which socket closest to the main switch has a problem, open it and check the wiring holes to solve it. >>>More
The wires are not connected, open the panel and test it clearly. Reconnect it, tighten the screws on the binding post, and check that the wires are not connected incorrectly. The live wire is connected to L, the neutral wire is connected to N, and the ground wire is connected to E.
The contact between the wire and the socket is not good, turn off the main power supply, and then remove this socket, the screws on the terminal at the back are loose, and you can tighten it. >>>More
If the brightness of the lighting can meet the requirements, only one lamp can be installed. >>>More
Curtains vary widely in materials and at different prices. It is recommended that you first go to the curtain store to take a look and compare. >>>More