-
Anonymous users2024-01-23If an incandescent lamp is used, it should be caused by the wire joint, or the poor contact between the screw and the reed of the lamp holder.
The solution is to pull down the electric switch in your home and re-tighten the spotlight. If it still flashes, turn off the power and use the toothbrush handle to gently raise the reed in the middle of the socket screw. Not yet, after turning off the power, you have to check whether the wires are loose one by one, and it should be okay to re-tighten.
If you are using an LED light, you can try to switch the neutral wire at the switch with the live wire.
It will definitely be after a long time, no matter how many watts of the lamp, it will heat up after a long time, not to mention the continuous lights, the curtains will change color after a long time, and then burn! Maybe it will end up! Rest and don't get too close
Don't be superstitious. As long as you work together as a family, be careful, be honest, work hard, and have a good relationship with everyone, you will definitely go well.
There are two possible ...... in this situation
First, the degree of flooding is relatively serious, and the walls are soaked with water inside and out, and the amount of water contained in them is relatively large. So, in the later stage, it has been seeping water for ...... >>>More
Hello, if there is a dispute, it is recommended to negotiate, and if the negotiation fails, you can collect evidence, go to the labor inspection department to complain or apply for labor arbitration.
The float in the tank is set too high, just turn it down a bit.