-
Anonymous users2024-01-24If the bathroom heating pipe is not connected to the heating, you need to consider whether it will be connected in the future, if it will not be connected in the future, then cut it off, if it is a pun, the plug will be blocked! If it's a single tube, string the tubes together! That's it.
-
Anonymous users2024-01-23If the floor heating pipe in the bathroom is not connected, this mouth will flow out, and you don't have to deal with it? Otherwise, if you connect it, there will be no place to put it.
Then you can lay floor heating pipes, no need to install radiators, and some is to install towel racks, find Shure environment for free door-to-door measurement, make a plan, and quote.
Hello, from the aspect of what you said, there are the following factors that affect whether the floor heating return water of your home is not hot: 1. The laid pipe is too long, the water flows to the end only the temperature of warm water, there is no hot water temperature, and there is a temperature difference of about 10 degrees between the water inlet and the return water. (If this is the case, it is recommended that you add a circulating sail fiber pump) 2. There is dirt in the pipe laid in your home that blocks the water pipe, so that the water temperature is returned to the cold 3, and the filter screen is blocked, which will also lead to this situation.
The method of deflating floor heating from the toilet radiator is: it is necessary to open the air release valve of the water inlet pipe of the water separator and the air release valve of the return pipe to degas the floor heating device. >>>More
The degree of leakage will be closely related to the slope of the pipe, the tightness of the joint, and the resistance of the lower section of the joint. FYI.
When you contact electricity, you have to find an electrician to pick it up for you, press, you can't fool around at home, and you are afraid that the connection is wrong, so you have to find an electrician to get it for you.