Can the slow fall of the flushing toilet seat fail to adjust?

You can adjust the side with a white lid to pry it open, you will find that there is a screw inside 6 squares to tighten it, both of them go in.

Plastics and springs will be jet lag fatigue, so let's change one, it's 40 pieces.

It is normal for the slow descent to fail, check where you bought it, and you can change it.

First of all, let's analyze the structure of the toilet tank, generally speaking, the water tank of the flush toilet will have some structures like this: float, water inlet pipe, drain pipe, seepage pipe, water plug, flush button. They form the drainage structure of a toilet bowl, forming a flushing motion.

When it is convenient for us, press the button of the flush, at this time the water release knob will be triggered, the water will be released, after a certain extent, the water plug will fall down to block the water outlet, stop the water, and the float will also fall with the drop of the water level. The difference between the two buttons.

1. The two buttons on the toilet bowl are half water and the other is full water. Two buttons on the toilet bowl are one large. Press the big button for a large amount of drainage; Press the small button to drain the water small.

Under normal circumstances, the toilet volume, the small pressure is the small flush volume, which is a water-saving design, and the current toilet is basically like this, pressing two at the same time is to flush the whole water.

2. The two flush buttons are to save water. The big button is pressed after the big solution; The small button is pressed after the small release. The large button has a large flush volume and can flush away solid feces.

Finally, I will teach you a little trick, that is, put some stones or pebbles, empty plastic bottles, etc. in the water tank of the toilet, so that the drainage will be less and play a role in saving water resources.