The line buried in the ground from the living room to the bedroom at home was broken, and I bought a

Updated on Living room 2024-05-07
3 answers
  1. Anonymous users2024-01-23

    1. Turn off all power supplies. 2. Rewire. 3. Delete the broadband connection.

    4. Online neighbor - local connection - attribute - protocol (TP IP) - attribute, - automatically obtained. 5. Enter the IP in IE to enter the account. 6. Set up the internal broadband account of the router.

    If it doesn't work, press and hold the RESET button for 5-10 seconds.

  2. Anonymous users2024-01-22

    Now that there are a few wires connected to the router, it is confirmed that the external line is connected to the WAN port, and is the WAN light displayed normally? Is there a cat or other device in front of the router? If you can, set your computer's DNS to see if you can open the web page, and can you tell me the make and model of your router?

  3. Anonymous users2024-01-21

    It's just that the power is off and you can't get on Isn't this simple? Don't move anything Don't power off the router and restart it It's not a factory restore!! Restart your computer again.

Related questions
The light in my living room is always broken, is it a wiring problem?
2 answers2024-05-07

Check the line, is it the cause of the high current.

The network cable at home is broken to the wall, and it is not good to walk the bright line in the l
3 answers2024-05-07

As long as you find a place with power supply to install a wireless router, the signal is still OK as long as it is not a few walls, this kind of equipment is easy to install according to the instructions, you can try it yourself, and then find someone. Generally, the operator who installs the broadband network can help you get it for free.

There is a wireless router in the living room, and there is a network cable to the bedroom (in the b
2 answers2024-05-07

Of course, you can, 1, you make sure that the network cable of the network port of the bedroom has been correctly connected to the LAN port of the main route2, the subordinate router installed in the bedroom, first enter the settings, turn off the DHCP function 3, after the setting, use the network cable from the bedroom network port to the LAN port of the secondary router.

Can I remove the wireless router from the bedroom and reinstall it in the living room?
4 answers2024-05-07

The key is whether the wires can be connected well - the wireless router can be connected to the network cable of the external network, can get working power, just keep the same wiring method as before, and work the same everywhere.

The signal of the wireless router at home is too weak, and it is OK in the bedroom, but the signal a
4 answers2024-05-07

Generally, you can change the route with a strong signal or buy a wireless router as a relay, and it is recommended to use the second method to be more practical and convenient. You only need to buy a wireless router bridge, and the setup is relatively simple and convenient.