-
Anonymous users2024-01-23One end is connected to the rubber plug at the bottom of the water outlet, and the other end is connected to the upper plastic rod, the long one that will lift up when the water is discharged.
-
Anonymous users2024-01-22Answer 1: The chain of the drain valve you mentioned, one end is connected to the rubber plug of the bottom water outlet, and the other end is connected to the upper plastic rod. The one that is long, the one that will lift up when the water is discharged, there should be a small hole pin on it (the one that fell into the water tank), the pin should be stuck in the chain, I suggest you can try it yourself.
2. If it really doesn't work, call the toilet merchant and let the merchant come to help you deal with it.
-
Anonymous users2024-01-21One end is connected to the leather loop and the other is connected to the following water shaft.
-
Anonymous users2024-01-20Just have a small hole pin in the tank to go up.
Open the lid of the water tank and move the water pontoon to see if it is stuck, and see if the angle valve below is open, it is okay, that is, there is a filter screen blocked in the water supply pipe between the angle valve and the water tank, close the angle valve and open it to clean it, and if you can't repair it, you can find the property department to repair it
1. Close the inlet angle valve; Take out the water-stop cover of the falling water part and check whether it is deformed, aged or has foreign objects adhered; Wash or replace the water-stop cap. >>>More
There is no good way to wash with a clean toilet.
Water outage is often a water pipe repair project, by the repair of the vibration of many pipe wall rust will fall off and block your water pipe, because the toilet outlet is smaller, easier to block, you can unload the connecting water pipe, put water to flush off the debris, you can't ask a professional to deal with it.
Directly remove the water-stopping rubber ring to achieve the effect of draining water. >>>More