-
Anonymous users2024-01-24If you want to save trouble, use glass glue to wipe the circle at the bottom of the toilet, remove the toilet at the safety point, smooth the drain around it with a cement brush, and after drying, install the toilet bowl and then seal the base with glass glue or cement.
-
Anonymous users2024-01-23It is caused by the fact that the rubber pad is not paved well or the rubber pad is aging, and the rubber pad is replaced or re-leveled.
The two small holes were originally used to fix the holes for installing expansion screws on the bathroom floor, but now the installation master has omitted this step and directly sealed with white cement or glass glue, the purpose is to encounter the toilet drain blockage, easy to disassemble! The situation you said may be that the sewer is blocked, find a maintenance master to repair it!
1. Glass glue is stronger than cement;
2. The glass glue can be adhered to, it needs to be cleaned, there can be no water, and it can be used for 48 hours; >>>More
Where is the leakage at the bottom of the toilet broken, and there are several reasons for the leakage: 1) The bottom of the toilet bowl has been perforated after years of use, resulting in water leakage; 2) The interface connecting the toilet to the sewer is loose or perforated, and the water flows to the bottom of the toilet; 3) The faucet (including the hose) connected to the toilet will also leak out and flow to the bottom of the toilet after years of water corrosion; You should check it carefully, the toilet that has been used for many years often has the above situation.
A leak under the toilet base indicates that the main riser is not smooth, and it is best to find a professional sewer master to dredge the sewer so that it will not leak.
There is a leak around the bottom of the toilet, first overhaul the following aspects: >>>More