-
Anonymous users2024-01-24In general, the cement mortar will start to set after 2 hours, and it can be walked around after 24-48 hours, but it will take days to completely dry. But remember not to scrape, rub, or smash. To dry thoroughly, the bond is strong, and it is estimated that it will take about ten days.
Unreasonable, generally pasted after the tile can not have the whole brick hollow, that is, the local sound can not exceed 20% of the whole brick (100 fast bricks are allowed to have 1 piece is empty), if more than this number must require the construction personnel to rework, the main material of rework (one is counted in the loss) by the head of the household, beyond this range by the construction party is responsible. If he disagrees, he will use this provision to complain to the Consumer Association.
Not at the same time! After shoveling off the garbage, it must be cleaned, cleaned, dried, leveled, scraped putty, and scrubbed. Each process should be in place, it should be dried, and it should be whitened at least 2 times!
This is not a connector. It should be your own responsibility. Water seepage caused by waterproof not brushed in place.
The reason why many people's homes will leak, most of the cases are caused by the destruction of the bathroom waterproof layer, because many owners lack the knowledge of waterproofing, do not know the structure under the tile, often think that the bathroom at home has been waterproofed, there will be no more leakage, in fact, the bathroom waterproof layer is not done well or cracked, which will cause the bathroom water to seep from the gap to the downstairs, which is the main reason for the bathroom leakage. >>>More
Depending on the degree of cracking, if the crack is small, you can fill it with caulk, and of course choose a caulk that is similar in color to the tile to keep it beautiful. >>>More