How to save effort when making white paint from solid wood?

How to make wood white is the most convenient.

There are two kinds of painting processes: spray painting and hand painting (that is, painting), and some TX think that the effect of painting must be good, but I don't necessarily see it. Because we are not spraying paint in the baking room of the factory, it is the worker's technique, not the process, that plays a decisive role in the construction at home.

Common decorative wood colors.

1. Red pine: Basically, the edge of the wood and the color of the heartwood will be a little different, the sapwood of the red pine is light yellow, and the heartwood is yellow with a slight red.

2. White pine: There is little difference between the color of its sapwood and the heartwood, which is white or light yellow.

3. Elm: The sapwood is light yellow-brown, and the heartwood is dark gray-brown.

4. Willow: the sapwood is off-white, and the heartwood is brown.

5. Acacia wood: the sapwood is yellow-white, and the heartwood is dark gray.

6. Ash ash: The sapwood and heartwood are both light brown, but the heartwood is darker than the sapwood.

7. Oak: the sapwood is pale yellow, and it will also be white with some brown. The heartwood is dark brown.

8. Mahogany: The sapwood of this material is off-white, with a little brown. The heartwood is pale grayish-brown.

9. Yellow-flowered wood: the sapwood is light yellow, and the heartwood is yellow-brown.

The above introduction of how to make the most trouble-free wood white, all the knowledge of common decoration wood colors, when choosing wood, you mainly have to let yourself like, look comfortable, and coordinate with the overall decoration effect. Although the choice of color varies from person to person, each type of wood has its own specific color.

In fact, it is very convenient to make white paint, and it is now popular white paint. Here's how:

1. First use putty powder and glue to drape several times (be sure to use good glue);

2. When the putty is dry, it is necessary to polish, it is best to use 360 gauze paper, polishing is very important, it must be flat, so that the paint brush looks good;

3. Note that the white paint is not brushed, but sprayed with a machine;

4. Spray the primer twice, and then use sandpaper to polish the uneven places after spraying;

5. After all the work is done, you can spray the topcoat, two to three times on the line, the putty is not limited, the glue must be good, the paint you can choose Nippon or China Resources, the primer and topcoat you can also spray two more times, but not too much.

1. If it is a paint-free board installed on the wall, it is easy to return moisture, so it is necessary to wait for the board to dry before making white paint; 2. If it is an iron substrate, it is necessary to do a good job of degreasing first, and polish the surface, otherwise the adhesion of the surface will be affected. Paint-free boards generally do not need to be white-painted, because the surface has different colors, and if the surface is white-painted, it will pollute the environment and increase costs.

What are the types of plates?

1. Solid wood board.

This is a relatively common type of board, made of intact wood, which has the advantages of durability and environmental protection. This kind of board is made of natural wood, which is environmentally friendly, so the price is expensive and the construction requirements are high. Solid wood panels are also made of less material, usually used for flooring and doors, and the rest of the panels are processed wood-based panels.

2. Plywood.

This type of eraser is made of multiple layers of thin plate glued and is often used as furniture panels. There are many sizes, such as 3cm, 5cm, 9cm, etc., and they are made by gluing process. The plate is of good quality and high hardness, so the quality of the processed products is very good.

3. MDF.

It is made of wood fiber and glue, and can be divided into different grades. This kind of plate is relatively soft, impact-resistant, easy to process, and it is used to make furniture in foreign countries.

4. Particleboard.

It is also called particle board, which is made of wood scrap and needs to be made with glue and additives. The advantage of this type of board is that it is inexpensive, but it has very low strength and cannot be used as a large furniture design.

Painting construction in home decoration is the last step of construction. Many people think that painting construction is relatively simple, just paint the wall, but it is not as simple as you think, and there are many things to pay attention to. If you don't pay attention to these details during construction, then there will be problems until you move in, whether it is maintenance or renovation is very troublesome, so it is best to do it in one step during construction to avoid trouble in the later stage.

The decoration steps are generally: demolition, water and electricity, tile, wood, oil. If you are looking for a carpenter to make cabinets at home, then the first process of the painter is to protect the finished product, not only these cabinets, but also some electrical tiles need to be protected, and they are simply covered with plastic sheets.

This way, you won't splash other furniture when you paint it.

Attention should be paid to the home decoration of the ceiling, especially at the corner, the yin and yang corners should be straightened to avoid cracking in the later stage.

The joints between gypsum board and gypsum board are relatively easy to crack, so they must be dealt with well.

When using gypsum board ceiling, a lot of nails will be used, so it is also necessary to paint the treatment, one is to avoid cracking in the later stage, and the other is to do rust prevention treatment for the screws.

Do a good job of these treatments, and then do a clear treatment, whether the wall needs to hang a net, mainly to see the base of the wall, if the wall of the new house is better, then do not need to hang the net, if the wall is soft, then to avoid cracking in the later stage is best to do the net treatment. The same is true for old houses, it is best to do it to avoid hidden dangers such as cracking in the later stage.

Then it is to paint with light polishing, and pay attention to the yin and yang corners of the wall when painting construction, and the error between the wall and the wall can not exceed 3 mm.

If the home is made of some solid wood furniture, then it is necessary to paint it on site.

The solid wood furniture made by the carpenter master on site, the painter is painting wood wax oil inside and out.

The effect of brushing the lacquer can effectively protect the solid wood from cracking, the surface is smoother, easy to wipe with a rag, and it looks more beautiful.

Summarize several important points of attention in paint construction, which can be used as acceptance criteria.

The paint seems to be very simple, but it is actually a cumbersome process, the details must be dealt with in place, the most important thing is to prevent cracking at the joints, putty to be batched three times, and polished with lights; There are also two topcoat brushing, yin and yang corner strip construction, top surface leveling construction, and anti-rust treatment of screws, and there are too many processes.

How to make white paint, if you want to save labor, you must apply it directly on it, but this may not be good.