-
Anonymous users2024-01-23Towel Rack Radiator Installation:
An experienced construction team should be selected for the installation, and attention should be paid to the airtightness of the system during the installation process, so as to ensure that there is no water leakage. In terms of the difficulty of construction, do not change the orientation of the heating riser, otherwise the workers will need to go to the neighbor's house for construction, which is likely to cause inconvenience to others and the construction party.
There are two points that should be paid attention to in the installation position of the toilet radiator:
1. The installation position should be low and not high.
2. The amount is installed below the window. Secondly, from a physical point of view: according to the air principle, the hot air rises and the cold air sinks, and the higher the radiator is installed, the more heat loss it has.
Under normal circumstances, the radiator is installed under the window, which can cause convection of the indoor air close to the ground, maintain the normal room temperature, and heat the air coming through the window, killing two birds with one stone.
At the end of construction, the stamping test of the radiator should be carried out. Generally, the construction team will reserve valves on the pipeline, and after installation, it should be tested and inspected to prove that there is no running, rising, dripping, or leaking.
1. The materials of towel racks are roughly the following materials: copper, stainless steel, zinc alloy and aluminum. Generally, the outer layer of copper, zinc alloy and aluminum towel rack should be electroplated, and the electroplating effect is good, and it is also very practical. >>>More
1. The commonly used materials of towel racks mainly include stainless steel, copper, aluminum alloy, iron, plastic, etc., and the towel rack made of stainless steel is not easy to rust, has strong surface stability, and is also the most commonly used. Plastic towel racks don't have the same longevity as other materials, but plastic can be processed into a variety of colors and shapes, making them suitable for users who don't use them for a long time. Second, the structure of the towel rack on the market now has a single and double-layer, a rod multi-rod, one end of the closed multi-end closed type, the spacing fixed type of movable type, hook type suction cup type screw fixed type, etc., one end of the closed type is more convenient than the two ends of the closed type in the hanging, the installation price of the suction cup type is cheap, but it is easy to fall off, the fixed type should be determined according to the towel rack material and the situation of the wall, so we must carefully choose the practical structure when choosing. >>>More
There are many specifications and models of steel tubular radiators for heating, and the more commonly used ones are: >>>More
If you install it on the wall, it is usually about 50 cm below the roof.
It is better to have a glass drill bit with rhinestones.