-
Anonymous users2024-01-24See below for details:
If the gap is intended to make ordinary caulk, the gap can be reserved left and right.
If the gap is intended to be sewn with caulk, the gap can be reserved for about 2mm.
Normal caulk (grout):
Strong adhesion, small shrinkage, strong color firmness, anti-crack flexibility, good decorative texture, pressure resistance, wear resistance, and mildew resistance, so that it can perfectly repair the cracking or damage of the floor surface, and its surface can also be painted, with good waterproofness.
Tile grout:
The decorative practicability of the beauty joint is significantly better than that of the color caulk, which solves the problem of unsightly and dirty black ceramic tile seams. The traditional caulk is applied to the surface of the caulk, but the new caulk does not need caulk to be the bottom layer, and can be directly added to the tile gap after the tile is bonded. It is suitable for gap filling of more than 2mm, and the construction is more convenient than the ordinary type, and it is an upgraded product of caulk.
The 30*30 bricks used in the bathroom should be small and large, and the waste of offcuts is also a lot. >>>More
If the waterproof layer under the tile is in place, it doesn't matter, if you don't worry, you can buy cologne fine seam glue to paint the gaps, even if the waterproof layer is not done, it will not leak.
There is no other way to chisel it off and re-paste it.
See if it's a leak in the wall pipes, or a leaky toilet, or a leaky washbasin, or if the waterproofing you did didn't rise and the water jumped onto the wall and flowed down.
It may be that there is water seepage in the water pipe, and the ground should also be hollow, resulting in water accumulation, the waterproof layer does not know how many layers have been made, usually the height does not mean that there is no water leakage, it depends on the number and thickness of the brush, as well as the flatness of the ground to decide! >>>More