-
Anonymous users2024-01-24Go to the hardware store and buy a suction cup with an integrated ceiling, and the four corners will come down as soon as you suck it. If you don't buy it, it's easy, buy a knife, insert it through the crack, and then pull it down to the side to bring it out.
-
Anonymous users2024-01-23I will, with a sharp thing, gently buckle it down.
-
Anonymous users2024-01-22Take a look at the place where there is a card to enter.
It is best to find an electrician from the property in the community to operate, which is safe and reliable, and improper operation will bring more trouble.
Lift the ceiling next to it first.
Take a ladder to the ceiling and take out the lampstand. >>>More
The ceiling does not need to be dismantled, the downlight you use, you can carefully observe, there is a spring buckle at the lamp mouth, squeeze it inward, the lamp can be removed, go out and change it, you can go to the place where the lamps are sold to see, and buy a new one by the way.
You this is the method of integrating the ceiling, generally it is directly cut down, yes, it is cut out, it is directly stuck on the top of the net when it is installed, the general situation is to cut it down directly, it is more tight to use a little force, but pay attention not to damage the ceiling, and finally be sure to turn off the power switch, you can disassemble the lamps and lanterns to ensure the safety of life, remember, remember, remember!!
The electronic ballast base is broken, try it at the merchant when buying a new lamp, and it does not light up when you go home to install the cavity ear, that is, the electronic ballast is broken. It can be reconnected to a chandelier head Hongbu and an ordinary bulb.