-
Anonymous users2024-01-23The effect of backfilling with Wei Fill Bao is very good, this is a new type of toilet waterless backfill technology, it has the following characteristics.
1: Waterproof, this product is divided into two components, A and B, by high-tech products, using special equipment and cement foaming. He will make the cement produce countless independent small pores, which are not connected to each other, have strong adhesion to the wall, and have good water blocking performance.
Screeding and a second waterproofing are omitted.
2: Integrity, on-site overall pouring construction, closely combined with the main project, the bottom of the caisson does not need to do secondary drainage holes, which solves the problem that the secondary drainage holes are easy to block.
Three: lightweight: after the completion of this product, the dry density is only 300-350KG m once molded, no need to do plastering leveling layer, can be directly paved with tiles.
Four: environmental protection: the required raw materials are cement, cement-based fillers, this product is neutral, does not contain benzene, formaldehyde and other harmful substances, to avoid environmental pollution.
5. Liquidity; Before forming, it has super fluidity, solves the various dead corners that cannot be reached by the construction of the waterproof layer of the toilet caisson, and covers the water supply and drainage pipe as a whole to prolong the service life of the water pipe.
Six: durability, the same as the life of the main project.
Seven: compressive resistance: overall pouring, inside and outside, no shrinkage, no sinking, compressive strength above the national standard.
Eight: the construction is simple, all can be completed within 1-2 hours, the site is clean and tidy, and the maintenance is convenient in the future.
Product advantages: This product has obtained national patents and passed the quality certification of national professional institutions, does not contain harmful substances, has the characteristics of anti-odor, anti-leakage, light weight, fast, easy to construct, compressive resistance, economical and applicable.
Bathroom backfill slag is completely possible, slag is one of the three materials suitable for backfilling. The bathroom backfill slag only needs to tamp the slag, and it can't just be poured into the bathroom like that, and there will be no problem. When I was decorating my home, the bathroom backfill was the slag used, and the upstairs bathroom slag was especially good, because it was lighter than sand and slag.
1. The waterproof layer of the bathroom must be honestly complete to avoid future troubles. Then the pre-designed pipelines such as water, electricity, coal, and sewer are arranged in place; >>>More
First: pour 45 kg of water into the bucket of the special tool, the water level height in the bucket is marked, reach the marked position, and then turn on the power of the mixer. >>>More
It is best not to put the head of the bed on the toilet partition.
Yes, if you make three doors, your shower room is relatively large, and the sealing must be done well, otherwise it will leak.