How do I clean the toilet?

Tiles: The rows of tiles near the side of the ground wall are difficult to clean, and are prone to yellow water and alkaline dirt, which is difficult to remove even with a brush. At this time, you can put the toilet cleaner used to clean the toilet into a watering can, or dilute it with hydrochloric acid or sulfuric acid to spray it on the tile from top to bottom, and after 10 minutes, clean it with a brush.

Toilet: Don't underestimate the use of leftover soap heads, its role should not be ignored. You can make a small pocket with a piece of gauze or old stockings, and put the soap head in the tank that hangs tightly on the toilet.

When soap is dissolved in water, it can be used to clean the toilet. As for the outside base of the toilet, which is easy for ordinary people to ignore, it should be sprayed with detergent and rinsed with water, and finally, wipe it dry with a clean cloth to make it as white as new.

Mirror: The mirror in the bathroom is in a humid environment for a long time, so it will produce water mist and blur vision, and it is difficult to clean it with a dry or wet towel. You can apply a layer of soap to the mirror first, and then wipe it dry with a dry rag to restore the clarity of the mirror.

This method also applies to glass countertops, brackets and basins in the bathroom.

Faucets: Hard water deposits from faucets can be eliminated by wiping with lemon slices.

Clogged showerheads: Shower heads can get poor water over time, usually due to limescale buildup. You can remove the nozzle, soak it in vinegar for two hours, and after removing it, use a toothbrush to brush off the softened limescale.

Mold nooks: If you don't want to see speckled peculiar green mold in the bathroom, the best thing to do is to spray the bathroom with diluted alcohol once a week. This way, you can easily prevent mold.

If you notice mold spots growing in the corners of the bathroom, you can also wipe them with a cotton ball dipped in an appropriate amount of alcohol.

Precautions. Hydrochloric acid or sulfuric acid is volatile and pungent, so please wear a protective mask and gloves when using it to avoid injuring yourself.

1. The tool Nagasaka toilet brush can also be replaced by a toilet brush, toilet cleaner, blue liquid is available in supermarkets, plastic gloves (toilet cleaner has a corrosive effect to avoid hurting hands), and stubborn stain steel wool balls are for standby.

2. Spray water first, then spray toilet cleaner, brush with a brush, and rinse with water.

If there are still traces, the steel wool ball can be solved.

You will have to prepare rubber shoes, long rubber gloves, iron brushes and oxalic acid, which are available in chemical stores and grocery stores, and rub them with oxalic acid. Toilet Cleaner is not effective for long-term stubborn stains.

84 disinfectantWear gloves, hold a steel wool ball, be patient, wipe it slowly, and pay attention to safety.

The toilet must be cleaned, otherwise there will be problems, how to say that it is like this, it is very heart-wrenching.

You can always 84 disinfectant or caustic soda flush below, but remember to pay attention to safety.

Clean with baking soda, then disinfect with 84, and usually clean anytime and anywhere.

1.Clean the garbage in the toilet first Many times, before we clean the toilet, we must first clean the garbage in the toilet to avoid the garbage blocking the sewer pipe or toilet mouth, so clean the toilet before cleaning the garbage.

2.Rinse with water again After we clean the toilet garbage, we first rinse the stains on the toilet with water so that the toilet does not have so many stains first, so that we can wipe the toilet with detergent next, so we need to flush the toilet with water first.

3.Wipe the toilet with detergent When we have rinsed the toilet with water, we can wipe the toilet with detergent.

Eighty-four disinfectant, laundry detergent, masks, gloves and mops are put together.