-
Anonymous users2024-01-23Hello, solid wood material selection, drying, finger jointing, seam and other requirements are very strict, if which process is not strict, small cracking, loose joints and other phenomena, the whole set of furniture deformation, so that it can not be used. Discrimination can be analyzed from the following points:
One: Listen to the percussion echo everywhere.
Two: look at the curvature and wood grain.
Three: The touch of the wood grain is natural and smooth and there are no seams.
Four: see whether the solid wood furniture is made of solid wood.
Five: distinguish the real from the fake according to the weight of the wood.
Whether the change of the pattern is natural or not. Weight aspect. Generally, solid wood is more expensive.
It is understood that early.
BAI in May 2009, the country DU >>>More
1.Solid wood is mostly used for varieties and parts with less material, and precious wood is rarely used for solid wood. For example, solid wood dining chairs are more common, but they are generally imported beech wood for medium and high-end products, maple, birch, domestic beech wood for mid-range, and rubber wood for low-grade ones. >>>More
1.To see if the toning is natural, the naturally formed pulp will appear in the position where the user's hand often touches it. The new imitation of Bao Bu Jian Xian Jelly is either unnatural, or it is made in places that are not often touched. >>>More
Observe natural defects: generally solid wood furniture has a certain amount of scarring, some scars will extend to the back of the board, look at the location of one side of the scar and knot, and then find out whether there is a corresponding pattern on the other side, if symmetrical, you can determine that it is all solid wood furniture. Some scars only extend to the middle of the wood, so it is not convenient to look at the back here. >>>More