-
It is a tungsten carbide and is available in different size series, specifically for the top one.
-
Wear-resistant alloy is the same thing as the turning tool head, but the model is different.
-
Steel or alloy steel with higher hardness.
There are many reasons for the top of the tailstock of the lathe to resist the machined parts for the processing of the vibrator, mainly in the following aspects: >>>More
It should be that the tip is not tightened, and the gap is large. Try again after clamping.
Now no, what are you for? The top is nothing more than a dead center plus bearings, and if it's a repair, there's no need to use drawings.
There are two kinds, the rotary center is commonly known as the [live center] and the dead center, both with a Morse cone and a tailstock to match, the Morse cone model is different in different sizes of the lathe, rough turning generally uses a live center, which can be processed at high speed, and the dead center with a carbide head can be used for fine turning, and the speed is slightly reduced.
5.1 Overview of mechanical assembly.
Assembly is a later stage of the entire machine building process. The various parts of the machine can only be assembled correctly to complete the required product. How to assemble parts into a machine, the relationship between the accuracy of parts and the accuracy of products, and the method to achieve assembly accuracy are the problems to be solved in the assembly process. >>>More