What glue is used to stick the toilet bowl without leakage

Glass glue can be used.

Glass glue, a commonly used adhesive in the household, is composed of sodium silicate and acetic acid and organic silicone. Sodium silicate is soluble in water and viscous, and is called water glass in the south and bubble alkali in the north.

Glass glue is a material that bonds various glass with other substrates and seals the hall. There are two main categories: silicone glue and polyurethane glue (PU).

Silicone leakage glue sealant - is commonly known as glass glue, and is divided into acidic and neutral (neutral glue is divided into: Zhiyin stone sealant, anti-mildew sealant, fireproof sealant, pipeline sealant, etc.).

Glass glue will do, as long as it is acidic. Whether it is transparent or porcelain white depends on the leakage of that location. You start by drying the water and stop using it for one night.

Wipe it again with rolling paper, confirm that there is no water and oil, and then smooth it with your fingers after applying glass glue. If the room temperature is at 25 degrees Celsius, wait 8 hours. If the humidity is below 25, wait for 24 hours and you can use it.

It can be used for the gap sealing of ceramic tiles, stones, glass, aluminum-plastic panels and other materials, the waterproof and mildew-proof seals of various kitchen and bathroom sanitary ware, the mildew-proof and antibacterial beauty sewing of ceramic tile floors and walls, and the moisture-proof and mildew-proof sealing of food cold storage.

To sum up, it is perfectly in line with your needs for sticking toilets.

Other adhesives may turn yellow and dirty after long-term use, so it is recommended that you try to use a sewing agent (high-grade kitchen and bathroom anti-mildew glue).

It depends on where the water is leaking, if there is a crack and leaking water in the toilet itself, use plastic steel mud and construct it on a dry surface.

If the bottom is not installed in place or falls off after a long time, use glass glue to wipe the bottom and the ground clean, shovel off the excess debris before construction.

I am a seller of building materials, and I am interested in communicating with each other, Taobao is also available, Want Want No.: XRQXRQ2004.

The toilet bowl has a kind of glue called flange.

Wipe the hole in the toilet bowl on the floor and then collapse the toilet.

The surrounding contact with the ground is marked with acidic transparent glass glue (note: the ground should be dry) can not be used for 24 hours, and it is OK after 24 hours.

The toilet doesn't need to be sticky! Glass glue can be used for installation! Just pay attention to the height of the design!

Qingdao Quancheng coating veterans are at your service!

With silicone, it works very well.

The leakage of the toilet is not a problem of adhesive, but mainly whether there are cracks and water seepage in the toilet itself, or the drainage pipe is not properly connected, and the water inlet pipe of the water tank is not properly connected. To prevent the toilet from leaking, check the quality of the toilet when installing the toilet to see if there are cracks and whether it is intact, mainly looking at the water tank and the urinal; Pay attention to the water supply and drainage pipes as required when taking over, and there is no leakage after testing the water and pressure.

Glass glue. White porcelain glue! "Jinwei Desheng Sanitary Ware".

It's good to use glass glue.

Glass glue is usually used. Glass glue is a commonly used adhesive in the home, consisting of sodium silicate and acetic acid, as well as organic silicone. Sodium silicate is soluble in water and viscous, and is called water glass in the south and bubble alkali in the north.

Silicone adhesive sealant is commonly known as glass glue, which is divided into: stone sealant, anti-mildew sealant, fireproof sealant, pipe sealant, etc. There is one more important thing to use glass glue:

In addition, some glass glue of poor quality does not have such a function at all, so you must recognize it when buying.

The villa master provides you with local building policies, building drawings, and villa design drawings;

Villa appearance renderings service, thousands of popular drawings for you to choose:?bdfc

Install the toilet, the area itself is not long-term water, so generally use glass glue on it, but if there is a leak has been found, it means that there is water inside, it is recommended to use a viscose with strong water resistance, in this case, it is recommended to use a special glue for laundry pool leakage, which can be guaranteed.

You can use Kandil kitchen and bathroom anti-mildew glue, waterproof and mildew-proof, high-strength bonding.