-
Anonymous users2024-01-23Here's how:
1.Choose fine weather for waxing.
On rainy days, the humidity is too high and waxing will cause white turbidity. When the room temperature is below 5 degrees, the floor wax will harden. Do not wipe the floor with a cloth containing chemicals before waxing, as it will cause poor adhesion of the floor wax.
2.Remove garbage and dirt from the floor surface.
Use a vacuum cleaner to remove trash and dust from the surface of the floor. Wipe the stains on the floor with a diluted neutral detergent. Stains that are difficult to remove can be wiped with water.
3.Dry thoroughly.
The moisture on the surface of the floor and the trenches is completely dry before waxing. The time required varies depending on the season, but it usually takes more than half a day.
4. Covering. Cover the wall baseboard and furniture with tape and paper, purpose: to prevent the floor wax from contaminating the wall baseboard and furniture.
5.Shake the floor wax.
Shake the container with floor wax and stir well.
6.Daub. Apply carefully in the direction of the wood grain of the floor, and do not miss or unevenly thicken. Applying too little can cause uneven shading, and too much application can lead to poor film formation. Keeping the thickness uniform is the key to waxing.
-
Anonymous users2024-01-221. Choose a day with good weather for floor waxing to avoid excessive humidity in rainy and snowy weather, and waxing will produce a white turbidity state.
2. Remove garbage and dirt on the surface of the floor. Use a vacuum cleaner to remove trash and dust from the surface of the floor. Wipe the stains off the floor with a diluted mild detergent and wring out the rag as much as possible when cleaning the floor.
3. Fully dry The moisture on the surface of the floor and the groove part can be completely dried before waxing. Before waxing the floor of the room as a whole, it is necessary to conduct a partial test in an inconspicuous place such as a corner of the room to confirm whether there is any abnormality. In order to prevent the floor wax from contaminating the wall baseboard and furniture, cover the above areas with tape and paper.
Soak the floor with a clean rag so that it does not drip. Do not pour the floor wax directly on the floor, otherwise it will cause marks and circles. Apply carefully in the direction of the wood grain of the floor, and do not miss or unevenly thicken.
4. Do not walk on the floor before the floor wax is dry.
Take care of hardwood floors.
1. The humidity in the room should not be too large, keep the floor dry and clean, and wipe it with a wrung out cotton mop for daily cleaning; In case of stubborn stains, wipe with a neutral cleaning solvent and then wipe with a wrung out cotton mop, and never use acid, alkaline solvent or organic solvents such as gasoline to scrub. >>>More
Many families have begun to choose to put a set of wooden flooring on the home, warm in winter and cool in summer, green and harmless, but the wooden floor has been used for a long time, it is inevitable that some bumps will occur, resulting in a lot of large and small scratches, which looks very unsightly, if you want to avoid this situation, you can consider waxing the wooden floor at home before moving in, reducing the appearance of scratches from the beginning, and prolonging the service life of the wooden floor. The first step, the ground cleaning, before waxing the wooden floor, you must do a good job of cleaning the ground, if the dust on the ground is not cleaned, it will greatly affect the effect of waxing, remember to wait until the floor is completely dry after cleaning, you can start waxing. The second step, soft cloth wiping, will be soaked in the floor wax soft cloth, along the floor texture gently wiped, the application process must be even, to prevent the occurrence of thin and thick conditions, the first side of waxing is dry, but also need to use sandpaper for surface grinding, and then start the second application, the premise is that the floor is dry, generally waxing two or three times. >>>More
Parquet waxing method:
Waxing method Shake the container with floor wax and stir well. Before waxing the floor of the room as a whole, it is necessary to conduct a partial test in an inconspicuous place such as a corner of the room to confirm whether there is any abnormality. In order to prevent the floor wax from contaminating the wall baseboard and furniture, cover the above areas with tape and paper. >>>More
There are two kinds of one is to spray directly with a spray head, and then wipe with a cloth that is not too dry, and the other is to dip the rag directly with liquid wax, or spray it on the rag, and then wipe the floor with a rag with wax!! It is best to take care of the solid wood once a month, and the main floor is always as good as new!! The latter is more convenient to use, and the wax is more uniform, it is best to replace the rag with a special floor mop, the effect is better, first spray 3-5 times on the cotton cloth of the floor mop, and then mop the floor, and then walk on it when it is dry.
This brand of flooring, its effect is indeed okay, after the call came, I feel that there has been a great improvement in the color and luster.