When arranging the toilet drainage pipeline, how to deal with the sewage and wastewater pipes when t

Updated on Bathroom 2024-05-20
2 answers
  1. Anonymous users2024-01-24

    It is best to avoid the intersection of sewage and waste water pipes and water supply pipes in the bathroom decoration, and the sewage and wastewater pipes should be wound into a U-shape under the water supply pipe, and covered with mortar on the top.

  2. Anonymous users2024-01-23

    The sewage pipe is below, and the waste water is on the top, because the waste pipe must be added with a P-type trap, and the bottom of the pipe must be 200mm from the ground, and at the same time, the owner is hidden in the kitchen cabinet when decorating.

Related questions
1 answers2024-05-20

st from the previous production

1 answers2024-05-20

This is basically fixed: a 100mm tube can be walked around. Some sides can be changed with small tubes.

1 answers2024-05-20

The standard is PVC110 sewage pipe!

3 answers2024-05-20

This pipe should be connected with a jacket.

Now use the plugging king to smooth it, and then use the sewer pipe of the same diameter, throw it away in the middle, and put it in with glue on the inside (remove the excess part) to make a protection. Although the diameter of the pipe is a little thinner, it eliminates the possibility of water leakage, once and for all! >>>More

3 answers2024-05-20

In modern home decoration, the bathroom is not only a place to wash off the dust, but also a place to relax the nerves and rejuvenate the floor. Therefore, instead of thinking of the bathroom as the most unclean part of the room, as in the past, it should be carefully planned. Today I will tell you how to install the bathroom drain. >>>More