-
Anonymous users2024-01-24Eclipse waterproofing recommends that if you can ensure that the walls and bottom of the bathroom are not leaky. It can be done on the bedroom surface. After it is done, make leveling and putty wallpaper, etc. However, it is not recommended. It is only used as a post-event preventive measure.
-
Anonymous users2024-01-23It doesn't work, you can spray it on the tile with a penetrating waterproofing type.
THE BATHROOM MUST BE WATERPROOF, WHICH IS A VERY IMPORTANT PROCESS, THE WATERPROOF LAYER SHOULD EXTEND FROM THE GROUND TO THE WALL, 250MM HIGHER THAN THE GROUND THE HEIGHT OF THE WATERPROOF LAYER ON THE WALL OF THE BATHROOM BY THE SHOWER HEAD SHALL NOT BE LESS THAN 1800MM; THE WATERPROOF LAYER OF THE COATING FILM IS EVENLY BRUSHED, THE GENERAL THICKNESS SHALL NOT BE LESS THAN 1 5MM, THE WATERPROOF SURFACE OF THE COATING FILM IS NOT BLISTERING, NOT FLOWING, SMOOTH AND IRVEX, AND THE JOINTS OF PIPE FITTINGS, SANITARY WARE FEET, FLOOR DRAINS, AND DRAINAGE OUTLETS ARE TIGHTLY CLOSED, SMOOTH AND NON-LEAKING. After the waterproofing project is completed, a 24-hour water storage experiment must be done
1. Inspect and accept the appearance, variety, specification, packaging, size and quantity of materials, and form corresponding acceptance records. >>>More
The complete solution is to re-standardize the waterproofing treatment of the bathroom.
The minimum height is in meters, and all walls and floors are done.
There are two situations in which the bathroom is waterproofed. >>>More