-
Anonymous users2024-01-231. The base of the cement cabinet (the height of the cabinet is generally about 780, the base is 150 + the cabinet 600 + the table top is 50 800).
2. Cut the tiles according to the size.
3. Put a piece of wood in the aluminum alloy so that the screws on it are very strong.
4. Put a screw in the middle of the aluminum alloy.
5. Use marble glue to glue aluminum alloy and ceramic tile (vitrified brick) together.
6. Cut ceramic tiles (vitrified tiles), drill holes through the water with glass drills, and keep watering when punching, one hole a minute.
7. Put the tiles (vitrified tiles) on the floor and the countertop tiles (vitrified tiles) on the countertop.
8. After paving, paste the outer edge on the edge strip, pay attention to the upper edge of the edge strip to be on a horizontal plane, the smaller the error, the better, my basic control is 1-2mm.
9. Cover with cement mortar, about 2 cm thick.
10. The bricks are being paved and the position of the vertical plate is left.
11. Installing a vertical plate.
12. The hole of the shelf is drilled in advance on the vertical plate. (The hole of the vitrified brick is estimated to be 1-2 minutes to drill a hole with a glass drill, there is no cement between the two partitions, the vertical brick strength is very large, and the countertop I made is very strong, and the force of chopping bones on it is dispersed by the countertop, and the force on the vertical plate is very small, and it is no problem to rest assured that people jump on it).
13. Pre-fix the drawer track and calibrate it.
14. Paste the back plate.
15. Tie the countertop of the steel bar, and after pouring the concrete, it is absolutely solid, and you can chop whatever you want on it. (Concrete is poured directly on it, no scaffolding is required, and the smashed countertop is very flat, it should be noted that the countertop against the wall should be slightly lower than the outer edge, and the water on the countertop will flow inside).
16. Paste kitchen wall tiles here.
17. Cast-in-place countertop.
18. The cabinet door panel is 18mm
19. The effect after completion, how is it, it looks good.
20. List. The total price is less than 3,000 yuan, I believe you must hold it.
It's about a meter, as for how much, it depends on your location and the materials you choose.
It's simple, depending on how long you want to make the cabinet. Kitchen cabinets are charged on an extended meter basis. The mid-range is generally 1500-3000 yuan a meter of extension. Estimate for yourself.
It's very simple, make the most common stainless steel plate plus marble cabinet, marble countertop, four or five hundred and one meters. It mainly depends on how big you want to be, so let's say which city? See if there's any of your peers.
Depending on the material, brand, domestic or imported, the price varies greatly. There are 300 per meter, and there are several thousand.
The cost of kitchen renovation varies depending on the region, decoration style, and choice of finishing materials. Generally speaking, the cost of kitchen renovation is between 5,000 yuan and 50,000 yuan. >>>More