-
Anonymous users2024-01-23There's no way, just dismantle the lock and change the lock.
Water can be soaked in 502, but the loss may be greater, it is better to forcibly break it and replace it with a new lock.
-
Anonymous users2024-01-22Answer hello dear, I have seen your question, and I am sorting out the database for you to find the answer, please hello dear later, 1. Drop 502 in the original place to melt and wipe off the original 502 of the lock mouth, and then use a suction to suck some insulating oil in the transformer in the lock mouth, 502 glue will soon become soft, and you can try it soon.
2. With acetone solution, 502 glue is a kind of resin glue, which can be dissolved with an organic solvent that dissolves the resin, such as acetone. However, inhalation of acetone is toxic, pay attention to the way to use, you can suck up the acetone and drip it into the adhesive on the lock.
When it is hot, use a windproof lighter or a small spray gun-shaped tool, add some industrial alcohol to the lock core, spray fire and heat it, and then immediately insert the key to open it.
After opening, disassemble and clean the lock core. These methods are used, and if you can't open them, then you have to change the lock.
-
Anonymous users2024-01-21Drop 502 on the spot to melt the original 502, and then quickly wash it off with water!
With insulating oil! Drop 502 in place to melt the original 502, and then quickly wash it off with water, very smart!
With insulating oil, pour some insulating oil in the transformer on the table, and the 502 glue will quickly become soft and can be rubbed off quickly. 3. The same solution can be washed.
502 glue is a kind of resin glue, as long as you use an organic solvent that dissolves the resin, such as acetone. However, acetone is toxic if inhaled, so pay attention to how to use it, and you can stuff the adhesive part into the bottle. It is said that if you freeze it in the refrigerator, the glue will also fall off.
Stick 502 glue on a small area, just soak it in hot water, if a large area is stained with 502 glue, apply acetone, and wait about 5 to 10 minutes to remove.
The best way to copy is to use a high-efficiency 502 glue remover. It can be done in a few minutes. There are some for sale online. >>>More
This is called the crime of damaging private finances, and if the circumstances are aggravated, divide it by imprisonment for up to three years.
If you are sticky, there are 2 ways to save it, one is to change the lock cylinder, and the other is to find the water to pour into the lock cylinder, clean the stickiness of the glue, and dilute the stickiness! However, one of the disadvantages of this method is that the lock cylinder is filled with Tianna's water, which is easy to rust. There is a chance that it will get stuck in the future, and the best thing to do is to change the lock cylinder! >>>More
Banana water can, but it may not be clean enough, the solvent of 502 glue is acetone, which can be removed quickly with acetone, or it can be scalded with boiling water and then wiped off.
To prevent others from maliciously pouring glue into the keyhole, there is only one way to replace the electronic combination lock.