I don t know why the toilet was bubbling and seemed to be blocked, but after a while, I went down. W

Updated on Toilet 2024-05-01
7 answers
  1. Anonymous users2024-01-23

    First, the diameter of the sewer pipe is thinner and the speed of the sewer is slower, the second is that there is some blockage in the pipe, and the third is that the water pressure of the flush is not large enough, so you can repeatedly flush it every once in a while or add cleaning liquid to the water, which can increase the air in the sewer pipe and lubricate the sewer pipe.

  2. Anonymous users2024-01-22

    Do you mean the flushing sink or the bottom of the toilet.

    If it's a slot, you have to open the lid of the flush button to see if there is a problem with the automatic valve. The thread is easy to send off.

    If the toilet is bubbling with water, it may be a little blocked inside, and it is best to use a household toilet to get it, don't wait for it to be blocked and then get it troublesome.

  3. Anonymous users2024-01-21

    The pipeline was temporarily blocked by tissue paper, feces, etc., because the water pressure and air pressure in the pipeline were changed again.

  4. Anonymous users2024-01-20

    This is because it is not completely blocked, and the water is still slowly dredging, and it has been dredged naturally for a while.

  5. Anonymous users2024-01-19

    Sometimes the sewer water flow is too large and it is easy to turn up, and after a while, the flow is small.

  6. Anonymous users2024-01-18

    If the water is not smooth, it should be a little blocked, and it should be cleared, otherwise it will be blocked.

  7. Anonymous users2024-01-17

    That's blocked. It's just not completely blocked.

Related questions
2 answers2024-05-01

It may be that the rotating part is dirty and has a lot of resistance. Try to clear it. Or drop an object at the junction of the ball and the rod, when the water is full, this object is also buoyant by the water, so the pressure on the ball is less. Once the water goes down, the pressure increases, and the float can be pressed down to open the water valve.

1 answers2024-05-01

If the toilet is blocked, it is generally that the things in the toilet can't be flushed, and the water is in the toilet, if the water from the floor drain is blocked by the drain, if the upstairs flush is returned from the floor drain and the toilet at your house, it is the main riser that is blocked, please adopt it.

1 answers2024-05-01

Hello. I plugged it with waterproof (waterproof material), so I have no problem using it. If you use all cement, it may swell, or you use something to pad it inside, and then use marble glue to seal it thickly.

3 answers2024-05-01

This is best to find a one on 58.com, which is the fastest way.

2 answers2024-05-01

If the upstairs water is also coming from your sewer, it is the main sewer pipe blocked, if it is just from the sewer when you flush the water, it is the main sewer pipe of your own house is blocked, and there is a slightly longer hand spring from the sewer.