-
Open the lid on the toilet bowl to check if the button and the flushing device inside have fallen off, and you can dispose of it yourself. If you don't handle it well, go to the store that sells sanitary ware and buy another set of flushing devices, and they will be responsible for replacing them.
-
Only manually, if the toilet is good, it will not be like this, it is better to change it to a better one.
Causes and solutions for toilet flushing weakness: blockage, water level of the inlet valve is too low, >>>More
This situation indicates that there is a blockage in the toilet, so that the water cannot be flushed down at once. >>>More
You can adjust the amount of water stored in the water storage tank appropriately, and raise the water supply valve float to increase the water storage capacity.
Open the toilet lid, turn up the water level switch in the water tank, make the key switch of the toilet lid longer, or stretch the spring inside, you can make the toilet flush suction better, try it yourself, it is really not good to call the shop that sells the toilet to send a master to get it down.
First of all, it is necessary to find the cause of the poor flushing, and then prescribe the right treatment. If the water level of the inlet valve is too low, you can disassemble the inlet valve, then take out the buckle of the water valve, rotate the water valve body in the counterclockwise direction, then adjust the height of the body, and finally tighten the water valve body clockwise, and buckle it. >>>More