When the frame structure is watering the balcony, due to the sinking of the foundation, the beam is

Updated on Balcony 2024-05-03
1 answers
  1. Anonymous users2024-01-23

    First, the foundation is reinforced to avoid continued uneven sinking, and then the beam is reinforced.

Related questions
3 answers2024-05-03

If the balcony rests on the cantilever beam, the side beam should be set on the outside of the balcony board, and the balcony board transmits the force according to the two-way plate, and part of it is directly transmitted to the cantilever beam, and part is transmitted to the side beam, and then the side beam is transmitted to the cantilever beam. The reinforcement of the balcony slab should also be reinforced in the way of the cantilever slab, that is, the steel bar at the top of the slab should be set up along the length and appropriately strengthened.

3 answers2024-05-03

In PKPM, the sanitary partition wall is infilled according to the wall, and the self-weight of the partition wall is added to the beam according to the dead load on the beam line!

3 answers2024-05-03

Earthquake is what do we want or what frame structure to back? How much do I pay for heating plumbing?

2 answers2024-05-03

OK.

The following conditions should be met: >>>More

1 answers2024-05-03

According to the GB50009-2012 "Code for Structural Loads of Buildings", balconies that may have a large number of onlookers, such as balconies facing the street, have more than doubled the design value of the live load. Although the landlord did not notice the anomaly, it does not mean that there was no damage. The only thing you can do, and must do, is to remove the weight in time and move elsewhere. >>>More