What should I do if the toilet is clogged and the water is on the back

You can try it with an old-fashioned mop, it must be a strip of cloth mop, and pour half of the water into the toilet. Then press hard into the hole with a mop. Be sure to press fast. The principle of this method is to dredge it by pressure.

Pullers, also known as pluckers (i.e., sinks and toilets with rubber lids blocked for unclogging), are tools for unclogging sewers, made of long handles and rubber bowls. How to use: Add water to the toilet, and then look at the amount of water that can have a certain momentum, put the leather hammer at the mouth of the toilet bowl and press it violently, as long as you hear a 'knock', it means that it works;If it doesn't work, add more water, press again, and that's it.

How is it against the water, buy a puff and try it.

The initial decoration of the bathroom is very important, because the decoration at this time should take into account the problems of waterproof, odor prevention and so on. Many people find that soon after installing the toilet, it will smell, why?

This is what my toilet base looks like after it is disassembled, it has been smelly for three years, so disgusting.

Let's talk about the four main reasons why the toilet stinks:

1. The quality of the toilet product itself is poor, and the void of the toilet is large, and there are a lot of stains left in it.

2. The project was not done well during installation, and the flange ring under the toilet was not sealed.

3. The base of the toilet is not sealed, or the glass glue of the base is not done.

4. There are some firing holes in the toilet base, but these holes are not sealed, and the smell comes out.

The solution of Article 1 is that we can only buy toilet products with better quality, and we can buy better glazed products.

Article 2 suggests that you should use glass glue for the flange, and when you use this kind of glue, you should use water to flush it with water to see if there is any leakage.

Article 3 Most of the toilets that we sleep on now do not use cement to seal the bottom, most of them use glass glue, and we must pay attention to not break it when playing glass glue, and we must play it completely in a whole circle.

The base of the fourth toilet bowl usually has two or three firing holes, and many people don't know about it. Some merchants do not treat the product when it leaves the factory, so after you install it, the smell of the toilet will flow out of the holes here, so we have to seal these holes.

This small suggestion, in fact, installing a toilet is a kind of technical work, even if the worker is skilled, it is not as good as installing it yourself. When you buy a product, you can also let the merchant package install it, so that you can save the installation fee.

It should be noted that if you want to lay the floor tiles and then install the toilet, this is the correct installation sequence.