The living room light is not on, what should I do if the LED lamp beads are broken?

Updated on Living room 2024-05-07
1 answers
  1. Anonymous users2024-01-23

    The life of the LED lamp is very long, if the lamp bead is broken], the cause should be identified, and after the cause is found and the symptom is solved, the damaged lamp bead should be replaced with the same lamp bead, so as to ensure that it will not be damaged again after replacement.

Related questions
The LED lights in the living room are not on
1 answers2024-05-07

Generally, there is an open circuit of the LED lamp beads in series, and it can be replaced or directly short-circuited.

Ask the lights in the living room of the great god, the LED lights are not on, and there have been o
1 answers2024-05-07

Typical poor contact! All wiring should be checked for bad contact, and if you have an electric soldering iron, you can re-solder the rectifier circuit board.

The LED light in my living room is not on, but I can see that the lamp beads are flashing a little,
1 answers2024-05-07

I used to make LEDs, your situation is a quality problem, the lamp has been a long time, the solder joints inside have fallen off, but the distance is very close, so hesitate to expand and contract, it will be energized for a while, and the power will be cut off, which will cause a flash. This cannot be repaired, only replaced. >>>More

The living room light is not lit or may be broken, how to operate and open it for a new one, urgentl
2 answers2024-05-07

There are four dialable clips above the four bezels of the lampshade, and the cover can be removed by dialing the direction.

The LED light on my living room headlight is not on. Others are normal.
3 answers2024-05-07

It should be that the drive power supply is broken. Try it with a different drive source.