The laptop can receive a wireless routing signal on my balcony and can access the Internet. Not in t

Through the introduction on the website, we can expand the wireless coverage by placing an extra unlimited route in an area that can receive a good signal.

I'm going to mention the main ones here. There are pictures on the Internet, and it is relatively easy to configure.

Suppose that residents B, C and D living in the same building want to use the ADSL broadband wireless Internet access in house A, but only some areas of B, C and D have good signals, and the signal in other areas is weak or cannot be found at all? Add a TP-LINK wireless router to home B, C, and D, and you can achieve perfect coverage of the entire area and eliminate blind spots through the wireless bridging function.

Wireless coverage can be achieved not only in homes, but also in environments such as multi-office floors, residential quarters, and duplex homes.

Configuration Guidance: Convention: The wireless routers in the homes of residents A, B, C, and D are marked as Wireless Router A, Wireless Router B, Wireless Router C, and Wireless Router D.

X in an IP address can range from 2 to 254, but the last digit of the IP address cannot be the same for all computers and wireless routers.

2.Configure wireless router A.

Enable the Bridge function of "wireless parameters", write the MAC addresses of wireless routers B, C, and D (MAC addresses can be viewed from the stickers on the backplane of the device), and modify the SSID and frequency band according to personal needs;

In the Network Parameters - WAN port setting, set the wireless router A to surf the Internet.

3.Configure wireless routers B, C, and D.

Disable the DHCP server;

Change the IP address of the LAN port to be different for each device);

Enable the Bridge function of "Wireless Parameters", write the MAC address of wireless router A, modify the SSID, and adjust the frequency band to be the same as that of wireless router A.

4.Complete the setup.

Operate your own computer to connect wirelessly to the wireless router to achieve wireless sharing Internet access.

Use the Wi-Fi network of your neighbor's house.

When you get to the bedroom, because the wall blocks the signal, and the distance increases, the signal weakens, or even loses the signal.

If you want to solve the problem fundamentally, install a wireless router in your own home, and make your own wireless AP point.

Wireless networks often have a lot of constraints, for example, there may be too many walls in the room to block the signal. If you really want to ask what you can do, you can add a wireless router in a place that can receive the signal and send the signal so that your computer can receive it.

Use a wireless router, his setting method is the same as the general routing settings, If you have a line at home, then it is recommended that you buy a wireless AP, it is a wireless signal transmitter, I am using this now, I feel that the speed is OK, the price is not high, the price of wireless router is not high, I sell it in a small store, it is TP, you can go and see if you are interested.