-
Anonymous users2024-01-24There are several points in the hardcover room to solve the problem of anti-oil smoke smell.
One;; The flue check valve is not easy to use, or it is broken (it depends on whether you are, it smells when you just come in or it smells big in the past few days) There is no check valve at all, and the range hood hose is directly placed in the flue and fixed with foam.
Two; The flue is damaged, there is a crack in the flue when the year comes, or the neighbor has renovated it or damaged it during repairs. Generally, there will be a sewer pipe next to the flue, and the tile will be glued for the sake of beauty, if there is a crack in the flue, there will be a smoke smell on the top of the place. Socket switches must not be installed on the flue.
Three; It is okay to thoroughly control the kitchen odor and the range hood odor. There are two main ways.
1. Diversion Do not use the existing common flue, block it, and take the wall to discharge directly to the outside. (It depends on the age and structure of the stairs).
2. Check and repair check valves and flues, which can be treated by elimination method. First treat the check valve, and then remove the ceiling or cabinet.
It's best to find a professional, such as Zhengran Odor Prevention, but we are only in Shenyang.
-
Anonymous users2024-01-23Two workarounds:
1.Install a one-way shutter at the flue mouth, so that your fumes can be discharged into the main flue, but the fumes from the main flue can not enter your kitchen.
2.Seal the inlet of the main flue, open another hole, and your fumes will be discharged outdoor. Contact me.
-
Anonymous users2024-01-221.Install a one-way shutter at the flue mouth, so that your fumes can be discharged into the main flue, but the fumes from the main flue can not enter your kitchen.
2.Seal the inlet of the main flue, open another hole, and your fumes will be discharged outdoor.
-
Anonymous users2024-01-21You can replace a check valve at the flue mouth, so that your own oil smoke can only not enter, and the outside oil smoke can not enter, so it will not cause odor channeling.
-
Anonymous users2024-01-20The design of the magnetic seal flue check valve is derived from aviation technology, and the magnetic seal flue check valve consists of a valve body and a valve plate located at the valve port of the valve body. Its special feature is that the valve plate and the valve body are provided with a magnet suction assembly corresponding to the valve port edge, and a sealing rubber ring is arranged on the valve plate corresponding to the valve port.
The magnet adsorption assembly is designed with a magnetic force to ensure that the range hood can blow the valve smoothly and ensure sufficient sealing force (it has been rigorously tested, do not worry). Due to the addition of a magnet suction assembly between the valve plate and the valve body, the valve plate and the valve body can still ensure a tight closing state under the influence of static pressure and negative pressure in the flue, significantly enhance the anti-reverse effect, 100% sealing, and completely eliminate the smell of smoke in the kitchen. Taobao has it for sale.
-
Anonymous users2024-01-19The property is super to the people, this thing is not visible on the surface, when the occupancy rate reaches a certain level, there are generally more people with two years, and the warranty period will definitely pass. I can only admit it!
It is certain to change the check valve, but not all check valves work, and the developer should have installed a check valve at that time, but it will generally be poor. Be careful when you re-choose.
-
Anonymous users2024-01-18The check valve must be replaced by the one you bought, and the one that is equipped before the decoration is almost useless, so it is recommended to buy a better one.
-
Anonymous users2024-01-17Dear, does your kitchen smell of oil smoke? Do you still smell the choking chili smell of other people's stir-fried vegetables every day? Do you still smell the smell of fried salted fish at other people's homes?
You can choose to install a closed valve at the flue mouth at home, so that under the joint action of the smoke valve and the closed valve, you can prevent the backflow of oil smoke. However, it should be noted that the installation of a closed valve can only be used when the backfilling is not particularly severe. This is because the smoke at home will first pass through the auxiliary flue, and then enter the main flue through the hole in the grid, this design is to ensure that the smoke of each household can be isolated, if the home will be directly connected to the auxiliary flue in the main flue, it may be due to the low pressure and lead to string smoke or smoke and other phenomena. >>>More
Saw the flue open and add a closing switch (like a fan blade, pull down the rope to open, and then pull down and close).
The device that can prevent the kitchen flue from backing up in other people's homes is called the flue check valve. The new design is better with airtight silicone.
I don't know if I can understand what I'm saying.
First, your smoke machine does not have a check valve, which must be installed now, because many kitchen hoods now have a large exhaust volume, so the flue in the existing building will have the problem of odor if there is no check valve. >>>More
What you said is completely true, add a check valve in the middle of the pipe sawing of the range hood, but before that, you have to determine whether it is the smell from the range hood or the smell from the flue and pipe interface. If it's an interface, you don't have to connect it, use quick-drying powder or glass glue to seal the flue and the interface and don't leave a seal, the general smell is here, and the range hood rarely smells.