-
Anonymous users2024-01-24The platen is stuck in the rails. If the tailstock fastening screw is still loose, see off the screw, take out the pressure plate, and replace the screw.
Lathe tailstock adjustment chuck device: a bearing is installed between the hub core sleeve and the chuck hub sleeve, the adjusting chuck and the chuck hub sleeve are connected by chuck screws, the adjusting chuck is provided with a toggle pin, the hub core sleeve is provided with a hub root locking nut and a lock nail, and the chuck hub sleeve is provided with a locking screw and a pad.
The tailstock lead screw thread is severely worn.
The threads of the platen screw are worn. >>>More
No. 5 on the Mohs scale.
5 points have been canceled It is difficult to do things with a small amount of money. >>>More
Adjust the tailstock left and right deviation from the center, the center is consistent with the spindle center when leaving the factory, such as the actual processing of the long shaft workpiece tailstock top lathe, if there is a taper, that is, the size of the head is generated, the screws on both sides can be adjusted to correct the center position, to ensure that the diameter of the two ends is consistent.
Both 6150 and C650 are dismantled from the back rocker. The mandrel is also pulled from the back.