Midea gas water heater kitchen is easy to use, and the shower is not good, so the water heater does

There are many reasons why gas water heaters are not good for ignition, and any component damage of water, gas, and electricity will cause the water heater to fail to ignite. In fact, many times the reason why the fire cannot be ignited is because the hot water pipeline is blocked due to the scaling of the waterway, resulting in a large back pressure of the waterway flow, which is large to a certain extent, and the water heater water-gas linkage device will think that the hot water faucet has been closed and the gas channel is closed, there is no gas, of course, it can't catch fire, if the hot water faucet is fully opened in the near future, the hot water pressure is smaller, and the possibility is greater. Now that the igniter is working properly, it is even more certain. >>>More

This situation should be that there is a leakage of electricity in your water heater during use. And your power supply should not have an effective ground. It is recommended that it is best to directly let your water heater have an effective grounding and use it normally in the future, otherwise it will cause some unnecessary trouble.

Do you want to turn the handle of the shower faucet a little past the hot water so that the water temperature is hot?

This is because the hot water pipe in your home is relatively long, and after the water heater is started, you must first release the original cold water in the hot water pipe before the hot water can come out, and some people even need to put hot water for ten minutes before it can come out.

It will not be cold, and if you use too much hot water from the faucet, there is a possibility that the heat output will decrease.