-
Anonymous users2024-01-24Now the floor tiles are basically dry paving, and the original floor tiles have little impact, but this will increase the elevation of the ground surface by a few centimeters, which will have an impact on the height of the door, the ground elevation outside the bathroom, and the toilet drain. There is no problem with laying floor tiles on the floor tiles, but there are many problems to pay attention to when laying wall tiles on the wall tiles! If you lay floor tiles on the floor tiles, because the surface of the lower bricks is relatively smooth, it cannot be glued firmly with ordinary cement sand, and it must be pasted with a special tile adhesive!
There are many types of adhesive brands, and the common ones in the building materials market are Meichao Zhancibao, Tangmu 905, as well as Mapei and Belliway.
-
Anonymous users2024-01-23Yes, it should be applied with an interface agent.
It's not good to lay anything, because there is water all the time, so it's better to leave the floor tiles exposed. You can find a master who is engaged in decoration to lift the bricks in a few clicks, and it is best to make up another one.
The quality of the bathroom floor tiles is not good, and a layer of bright glaze cannot be applied on it, and it is easy to have two layers of skin.
It can be painted, but the adhesion of the paint is poor, the wear resistance is poor, and it is easy to cause the paint film to peel off and wear in the later stage.
If there is no problem with waterproofing, you can re-lay it on top.
In the bathroom, the piece that you don't slip on after taking a shower is a non-slip mat. It's sold in supermarkets.