The kitchen trips, trips from time to time, sometimes 2 times, sometimes a day. No problem with line

Updated on Kitchen 2024-05-21
3 answers
  1. Anonymous users2024-01-24

    It's just that the current is too high. There is a leakage of electricity, or there are too many high-power electrical appliances.

    Lubao malfunction.

  2. Anonymous users2024-01-23

    It is not ruled out that the leakage protection switch is malfunctioning, if possible, replace one and try it.

  3. Anonymous users2024-01-22

    Use the elimination method to unplug all the electricity and try it one by one.

Related questions
1 answers2024-05-21

Tripping has leakage and overload, short circuit and other reasons, if leakage and short circuit is unable to push the gate, it is estimated that it is overloaded, you take a photo of the main gate to see how much power is.

1 answers2024-05-21

First check where there is leakage or short circuit, disconnect the power supply in these places one by one, check the line in the place after finding the place, see which one is damaged, and replace it!

2 answers2024-05-21

It is very easy to explain, there are more electrical appliances in your kitchen, and the wires of your kitchen socket are relatively thin, and the two situations are added together, it is easy to trip; Analysis: When only a small number of electrical appliances are used in the kitchen, the wiring of the socket can work normally; When you use several electrical appliances in the kitchen at the same time, and the power is relatively large, then, the wires on the socket can not stand it, the wires will be hot, hot, the air switch on the line of your home in order to prevent the line from being burned, it will trip to protect the line. In this case, you won't always use so many appliances at the same time, so sometimes they don't trip, sometimes they do. >>>More

2 answers2024-05-21

It is possible that the power exceeds the current limit of the leakage warrant, and the leakage warrant is replaced with a larger one.

3 answers2024-05-21

Hello; Replace this empty open, the reason is that the internal structure of the empty open is out of order, resulting in the failure of the locking function, you change a slightly larger air open to try it, if it is a leakage protector, there is no need to change the big one, the same model can, I hope it can help you.