What to do if the toilet can t get water

There are many reasons why the toilet does not enter the toilet, and the common one is that the filter is clogged (that is, the water inlet of the tank at the lower end of the toilet tank), which needs to be removed before the hose can be removed. Of course, there is a filter at the angle valve, which can be judged as long as you open the angle valve after disassembling the hose to see if there is water.

In addition, the float inside the tank is stuck, which will also cause water stopping.

If the toilet bowl does not go to water, you need to repair the water valve, the steps are as follows:

Step 1: Close the water supply valve and remove the water supply pipe. Open the toilet tank cover, remove the blue cap of the water valve, and remove the water valve assembly as a whole.

>Step 2: Rotate the top cover counterclockwise to remove it, and flip it over to take a picture as follows.

>Step 3: Remove the white hard sheet and black rubber.

>Step 4: Use transparent glue to enlarge the central axis, the purpose is to reduce the center clearance.

>Step 5: Replace the lid with the water appliance.

>Step 6: Replace the float, install the water supply valve as a whole, and connect the water pipe. Install a water supply pipe and a blue upper cover, and test the boiling water.

1. Check whether there is tap water.

Turn on other faucets, check if there is running water, and rule out external causes first.

2. Check whether the angle valve is closed.

Check that the toilet valve has not been accidentally closed and that the angle valve is open.

3. Check whether it is blocked by scale.

Take out the filter inside the tank and see if there are too many impurities, blocking the filter and causing tap water to not come in. If so, clean the filter and you're good to go.

4. Check whether there is a problem with the water tank button.

Check if there is a problem with the spring of the tank button, and if it is stuck, just flip it. If the spring of the tank button loses its elasticity, go to the hardware store and buy one to replace it, and the water can be restored to normal intake.

5. Check whether there is a problem with the water inlet valve.

Open the water tank and toggle the water inlet valve to see if water can be entered. Check whether the water inlet valve is stuck and the water cannot be entered.

6. Check whether the float and float are stuck.

Check whether the float or float is stuck and see if it can move freely. If the float or float fails, it will also cause water to not enter.