-
Anonymous users2024-01-23The water seal is broken.
Check whether the solenoid valve is not closed, if the solenoid valve is not closed, the water seal is broken.
-
Anonymous users2024-01-22It's a fixture problem. Because there are different models of sanitary ware from old to new. From the lifting float to the flip cover, and now to the lifting float. Therefore, different models need to be repaired differently, and the simple way is to try to reduce the flow rate of the angle valve.
refers to a spray of water, not a full water)
If there is no blockage, if such a situation occurs, then it is necessary to change the toilet.
There are three situations in which the toilet will leak, 1. The rubber ball valve is broken, the seal is not tight, and there is a leakage, as long as it is replaced. >>>More
The inlet valve is broken. Can be replaced with a new set. After replacing the old one, we will see if it can be repaired, and if it can be repaired, it will be repaired and set aside.
The toilet tank keeps running all the time due to the following reasons: >>>More
Open the toilet lid and adjust the valve.
Kiss! Hello, happy to answer your <>
The solution to the TOTO 765 toilet tank has been flowing is as follows: 1. First open the main valve of the TOTO toilet, that is, the angle valve, to see if there is no water. 2. Open the TOTO toilet water tank cover, check the reason why the water tank is not watered, first see if the piston can be plugged, if it can't be plugged, the water tank will leak, the switch is not enough, so it will not be watered. >>>More