-
There are two types: solid wood and board.
1.The normal opening position of solid wood is embedded with 3mm of space on each side, and the plate type is left with 2mm2For the door of the exterior shot, the door crack is left 3mm, and the plate type is left 2mm.
A brief introduction to the basic skills required for furniture shopping guides: >>>More
It is recommended that you go to the store to see the style of the finished security door, record the specifications of the door, trim the door opening to be consistent with the specifications of the finished security door, and buy the finished security door and install it directly. >>>More
MDF also becomes fiberboard, which is divided into low density, medium density, and high density. Looking at the quality of MDF can be seen from two major aspects: first, the relevant report information (which contains data such as water absorption expansion rate, static bending strength, formaldehyde release, etc.), because the waterproof effect of MDF is poor, for general cabinets are required to have a certain waterproof performance, for this kind of MDF can require manufacturers to customize wax; According to the amount of formaldehyde released, the general environmental protection grades are E0, E1, E2, E3 grades, the most common ones on the market are E1, E2 grades, E1 grade formaldehyde emissions are less, so E1 grade MDF is less harmful to the human body than E2 grade; In addition, many manufacturers hope to use high-density boards to make furniture, but in fact, the density of the board is too high, and the nail holding force is poor, and the board is easy to crack. >>>More
Generally, the higher the level of your furniture! The chances of doing it will be greater. >>>More
The furniture is rearranged and rearranged, as seen in the picture above.