After the phone fell into the toilet, it can still be used normally, I turned it off, took a hair dr

Updated on Toilets 2024-05-28
2 answers
  1. Anonymous users2024-01-24

    [After the mobile phone is injected, it is recommended that you do not try to turn it on again, if it is turned on, please turn it off as soon as possible, you can press and hold the power button for more than 10 seconds].

    Because mobile phones are electronic products. If the inside of the mobile phone is flooded, although the external water traces are wiped dry, there are impurities in the water, and the impurities will be adsorbed in the mobile phone motherboard and display components, and if they are not removed for a long time, they will be damaged by the components. If you blindly start the machine before cleaning and maintenance, it is easy to cause a short circuit in the components, causing unnecessary losses and dangers.

    It is recommended to send the phone to the nearest Samsung service center for testing and repair as soon as possible.

  2. Anonymous users2024-01-23

    It depends on luck, sometimes it works and sometimes it doesn't.

Related questions
2 answers2024-05-28

Use the clip to clip out the phone.

After taking out the mobile phone, wipe off the liquid water on the surface of the mobile phone jujube with a cotton cloth, then dry the mobile phone with a hair dryer, and then try to turn it on. >>>More

2 answers2024-05-28

If the phone falls into the toilet, it may be a fault in the line, and it should be sent to a professional repair shop for repair as soon as possible to avoid further damage to the phone, and in serious cases, it may also cause the battery to explode!

4 answers2024-05-28

Dear, if your phone is just flooded, it is recommended that you try the following methods: >>>More

2 answers2024-05-28

Hi! Please go to a repair center near you or Xiaomi Home to have it tested. >>>More

13 answers2024-05-28

You don't need to repair it first, you disassemble the battery first, if it is non-removable, turn it off, wrap it in newspaper and put it in the refrigerator for a few hours, then take it out and let it dry before trying to turn it on. If there is still a problem, there is no way, just fix it.