Is it okay to tile the bathroom directly without waterproofing?

Updated on Bathroom 2024-05-24
7 answers
  1. Anonymous users2024-01-24

    No, because the bathroom has to be in contact with and use water for a long time, if it is not waterproof, then it is easy to leak over time, and the tile itself has a water absorption rate, so there is no waterproof effect, so it is necessary to use professional waterproof materials to do waterproofing.

    The requirements of the waterproof standard for the bathroom are that the ground needs to be done all, and the wall should be at least full high, and if it is a lightweight wall, then it must be done full height.

  2. Anonymous users2024-01-23

    The bathroom can be tiled directly without waterproofing, but if there is a leakage in the future, it is not necessary to remove the bricks and then do waterproofing, and the waterproof will be used for prevention.

  3. Anonymous users2024-01-22

    Of course not, although the tiles are said to be waterproof, but the waterproof performance can not reach 100%, especially between the brick joints are easy to seep and leak, if you don't do waterproofing, it will definitely not work, and do waterproofing, if the amount of water is too large, it will also seep downstairs, waterproof can improve a certain protective effect.

  4. Anonymous users2024-01-21

    Or do waterproof is safer, if you stick the tile directly, in case of water leakage, you have to chisel off the tile and then do, very troublesome, now the polyurethane waterproof coating is not expensive, make a bathroom even the material 500 yuan (about 150 labor) enough, it is recommended to do, hope to adopt!!

  5. Anonymous users2024-01-20

    Finally, make it waterproof, otherwise it will be very troublesome in the future.

  6. Anonymous users2024-01-19

    It can be, local tyrants can be willful if they are rich. But think about the bathroom is the most watery place, if there is a leak in the future, you can only smash the tile and redo the waterproofing. It is labor-intensive, time-consuming.

    Home decoration waterproofing generally uses K11, JS waterproof coatings. However, to buy this kind of home improvement waterproof coating, you must buy environmentally friendly products, to see if he has passed the China Environmental Labeling Product Certification (commonly known as the Ten Ring Certification), for the health and safety of the family, do not buy expensive only buy environmentally friendly.

  7. Anonymous users2024-01-18

    Yes, provided that waterproof masonry glue is used.

Related questions
7 answers2024-05-24

It is not possible to decorate the bathroom at home without waterproofing and directly tiling. >>>More

4 answers2024-05-24

No, the bathroom must be waterproof, especially the shower area. Waterproofing should be done on the wall at least, the tile itself has a certain waterproof function, but there is a fine gap between the tile and the tile, or there is a possibility of water seepage.

3 answers2024-05-24

The waterproof is almost dry and then pasted, and the bricks cannot be veneered immediately.

6 answers2024-05-24

The sanitary partition wall is an exterior wall that does not need to be waterproofed, but the floor and wall in the bathroom must be done, and the waterproof construction must be done by professionals. Prevent water leakage into the wall of the downstairs or next room.

2 answers2024-05-24

The color difference of tiles is directly related to the decoration effect. It is not a batch of products, or the same batch may produce color difference, therefore, in the purchase process, each packaged product should be sampled and compared, and the tiles should be placed in the same variety and the same model of bricks, and the degree of color difference should be observed.