Is the electric water heater always installed in the bathroom?

Yes, but if possible, it is best to install it outside the bathroom; However, no matter which position it is installed in, the wire diameter of the power cord is best to use 6 square meters, because the power of the general instantaneous water heater is more than 3000W, and some will reach 8000W, safety first; In addition, the ground is reliable and the switch is protected from leakage to prevent the risk of electric shock.

It depends on where your pipes are going. If your water heater has multiple water supplies and has pipes connected to the kitchen, the hot water in the kitchen is provided by the water heater in your bathroom. >>>More

The hot water in the bathroom is connected to the basin, which should have been piped when it was renovated, and the walls were slotted. If it was not designed at the beginning, it could only be surface-mounted. Connect a tee in front of the hot water pipe switch in the bathroom, fix it along the wall, and then punch a hole through the wall to the top of the washbasin. >>>More

Adding an angle valve to the hot water pipes in the kitchen and bathroom can solve the problem.

Not necessarily, and it's a hassle.

After all, it is a household appliance, which not only needs daily cleaning and maintenance, but also the service life. At present, only storage electric water heaters and instantaneous electric water heaters can be handled in this way, gas water heaters are absolutely not allowed, and storage electric heaters are busy enough just to remove scale regularly, not to mention when changing water heaters, instantaneous heating is still a little worse. However, the service life of the electric water heater is not long, if you really want to get it, it is best to open a dark grid, like opening a door, it is best to open to the right, and to leave enough space for secondary disassembly and secondary installation. >>>More