-
Anonymous users2024-01-23Routing through-wall signal loss. Either change to an enterprise-level route. Either connect the line into the bedroom and add a route to do double routing.
-
Anonymous users2024-01-22The router wall signal is poor.
Yes, it doesn't affect, you just need to pick out one of the available IP addresses of the first router and give it to the second router as a way to access the Internet.
If the home area is large, buy another wireless router, and the second wireless router can be set up according to the wireless bridging method to achieve full WIFI coverage. >>>More
There are many reasons for this problem, such as the signal bandwidth of the router, whether it is still 5G, the location and distance, etc., but it must have nothing to do with supernatural events.
This has little to do with 150M 300M, mainly depending on the power of your router antenna, the dbi value, the general router is 5dbi, this power cannot penetrate the reinforced concrete wall, can only rely on the reflected signal to accept, so that once there are more partition walls, the signal is very poor. There are 2 ways to do this without changing your layout, one is that you buy a wireless router with a high power antenna, and the other you buy a wireless power amplifier with an external gain antenna. Personally, I suggest that you change the layout, you can install a wireless AP on the ceiling at the door of your room as a signal amplification, as long as you connect the power supply, you don't need a network cable.
Mobile fiber optic modem does not have a router function connection port, can not be connected to the network, either pull a network cable from the router to connect to the computer host or buy a wireless network card, wireless connection to the Internet, (the computer should have the same as the mobile phone can receive wireless signals, can be directly connected to the Internet,)