-
Anonymous users2024-01-23The decoration of the sunken bathroom is like this:1The sunken ground is first waterproofed twice.
2.Install the upper and lower sewer pipes. 3.
The sand fill pile is compacted to 5 cm below the ground. 4.Cover the cement and fill the level.
5.Do 2 more waterproofs. 6.
Floor tiles. The reason for the water leakage is the sand and gravel layer in the middle, which will gradually sink after a long time, and there will be cracks in the cement layer and waterproof layer above, and the water will leak down to the filling area. Because there is a waterproof layer underneath, the water cannot leak out, and the result is accumulated in the fill layer, and after a long time, the entire fill layer is filled with water.
Eventually, as time goes on, the waterproof sink below will leak, and a large amount of stagnant water will gush out.
The solution pointed out by experts is: the ground must be made into an inclined plane after the sunken ground is waterproofed, and the sewer pipe is made to the lowest, and then the sewer pipe is opened close to the sunken ground, wrapped with stainless steel net, and then covered with pebbles to guide the water, and then covered with sand and gravel. The advantage of this process is that even if leakage occurs, the water entering the sinking zone will flow out of the sewer without siltation.
Decoration points: 1. The drainage pipe is selected from a regular manufacturer of plastic pipes (to avoid galvanized pipes), and the cold and hot water pipes must be used accordingly, and the cold water pipes must not be used as hot water pipes; 2. The plastic pipe adopts hot melt technology to make the buried part of the pipe without joints and seams; 3. The floor drain installation of the drainage outlet is truly equipped with anti-blocking function. Waterproof Solution:
The sunken floor slab should be waterproofed 3 times (including the wall, height to the top), and then the cement is smoothed. Drain the water for 3 days and observe that there is no water leakage downstairs. Fill ceramsite and cement mortar to smooth the main body of the floor drain, then do 3 times of waterproofing, cement mortar smoothing, and finally pave the floor tiles and install the floor drain adjustment section.
-
Anonymous users2024-01-22Can you fill the bottom of a sunken bathroom with dirt, and what is the best way to fill it? Today is a long time to see.
-
Anonymous users2024-01-21Hello, you can choose cinder or sand backfill when backfilling, and the surface layer is leveled with cement mortar and then make a flexible waterproof layer.
Ventilation can properly eliminate some odors. But it consumes energy, there is noise. >>>More
What is good for hanging on the bed on the bathroom door? Preferably, a mirror is hung on the bed.
I heard that lighting candles in the bathroom often is a good way to get rid of the smell (the smell gas burns off). You can give it a try.
Garbage, sofa filling should be, first lining cloth, then brown 2 to 5 layers and then sponge, and then fabric, this is the norm, now the business in order to maximize profits, coupled with the lack of raw materials, just fill in something.
The best way to get rid of the fishy smell is to rinse it with clean water, and you can also use a toilet cleaner. When not in use, keep it ventilated. This way the toilet will not smell fishy. Thank you!