After the security door is installed, how to deal with the large gap between the door frame and the

The gaps will affect the beauty of the resonance, so it should be made.

Deal with the gap: bai

1. If the gap is large.

If the DU is more than 5cm, it is necessary to build a wall.

2. If the size of the gap is within 5cm, it is a non-standard custom door. The method of grouting can be employed. That is, cement mortar is poured into the gaps and the gaps are filled, which is relatively strong.

3. If the size of the gap is within 5cm, it belongs to the standard door. You can play foam glue and blow styrofoam to fill the filler, which is a material specially used to fill the gaps in the door, so as to avoid the door frame bursting or deformation in the short term.

Clearance affects the appearance of the future, so it is necessary to deal with the clearance problem

One. If the size of the gap is more than 5 cm, a wall needs to be built.

2。The size of the gap is within 5cm, which belongs to the non-standard custom door. Grouting can be used. That is to say, the joints are filled with cement mortar, and the gaps are relatively strong.

Three. The gap is within 5cm, which is a standard door. It can be used to make foam glue and foam glue to fill the board. This is a material specifically designed to fill door cracks that can burst the door frame or avoid short-term deformation.

1. First of all: the normal purchase of anti-theft doors are purchased according to the size of your door opening, the gap will not be too large, and one side of 1-2 cm is a version of the normal, which is for the convenience of installation.

2. There are two ways to deal with gaps:

a, grouting, that is, with cement into the gap, fill the gap, so that it is stronger, after the dismantling is not good b, blowing styrofoam to fill, this is specially used to fill the door gap of a material, the market is sold.

Styrofoam? It's better not to cover the door.

After the security door is installed, how to deal with the large gap between the door frame and the wall

Hello, dear, it depends on how big you are at the bottom of the shed, if it is within 5CM, you can grout, if it is more than 5CM, it is best to build the wall. However, I mean non-standard custom doors, standard doors, many manufacturers are not allowed to grout, only let foam glue, so that you can dig to avoid the door frame bursting nuclear crack or short-term deformation, and point gypsum mortar caulking can be less than 2 cm of gap with styrofoam, greater than 2 cm with cement blocking, provided that the door frame and the wall must be firm, should be the door hole is large to cause the door frame and the wall to have a gap, need to be repaired immediately and with high-grade cement.

Summary. 1. If the size of the gap is more than 5cm, you need to build a wall.

2. If the size of the gap is within 5cm, it is a non-standard custom door. The method of grouting can be employed. That is, cement mortar is poured into the gaps and the gaps are filled, which is relatively strong.

3. If the size of the gap is within 5cm, it belongs to the standard door. You can play foam glue and blow styrofoam to fill the filler, which is a material specially used to fill the gaps in the door, so as to avoid the door frame bursting or deformation in the short term.

After the security door is installed, how to deal with the large gap between the door frame and the wall

1. If the size of the gap is more than 5cm, you need to build a wall. 2. If the size of the gap is within 5cm, it is a non-standard custom door. The method of grouting can be employed.

That is, cement mortar is poured into the gaps and the gaps are filled, which is relatively strong. 3. If the size of the gap cover is within 5cm, it belongs to the standard door. You can play foam glue, blow foam glue to fill the fill, and open the barrier This is a material specially used to fill the gap in the door, so as to avoid the door frame bursting or deformation in the short term.

Than the heart] [than the heart].