-
Anonymous users2024-01-23During the installation process, for the sake of safety, it is best to install the heater away from the bathtub, basin, and shower during use, and try not to spray water directly to the heater during use. The wet area seems to be heated by light waves, and you can go in and wash it when you turn it on when you take a bath, but you don't have to worry about this problem.
-
Anonymous users2024-01-22Of course, the height of the ceiling itself should be taken into account, but the height of the ceiling is basically controlled between meters, and it is almost possible to adjust it within this range. I don't know exactly how to do it, this worker will take it into account, right? However, the dry and wet zonal heating system of AIA installed by itself has two kinds of heating, air heating and light wave, so the installation may be different from the ordinary one, but AIA is better and more assured.
If your ceiling appliances are decorated like that, there is no other way, but if you use AIA, you can remove the electric heater separately to repair, which is more convenient.
The heater is a combined unit composed of a ventilator, an electric motor and a radiator, which is mainly composed of an air heater and a fan, the air heater dissipates heat, and then the fan is sent out to adjust the indoor air temperature. >>>More
The bathroom is still integrated into the ceiling is better, if it is wall-mounted, it is better to put it in the dry area.
Find an electrician to take a look. If you are not an electrical major, it is not recommended to do it yourself.
The duct should be connected. It can be connected to the outside with PVC pipe, and the 10 cm hole can be considered: use 75 PVC pipe to connect 110 PVC pipe, and then connect to the ventilation pipe of the heater.