The lights in the living room have not burned out, but they have to be pressed several times to turn

Updated on Living room 2024-05-11
1 answers
  1. Anonymous users2024-01-23

    If there is no problem with the switch (it has been replaced), and there is no problem with the light (it can be turned on), then the problem lies in the terminal of the lamp, or the connection line between the switch and the lamp, check and deal with it.

Related questions
The crystal lamp in the living room is burned out, and the other lights in the house are not lit, wh
2 answers2024-05-11

Turn off the light switch in the living room, close the main switch, and see what the other lights are doing.

The LED lights in my living room are always burned out, and the value of the fire line is 1000 with
2 answers2024-05-11

Sometimes it is possible that the output voltage of a 500V megohmmeter is up to 500VIf a component does not care about it, it may damage the device if it touches the ground and the neutral line!

The switch of the toilet was pressed loosely, and the light couldn't turn on, what's the matter, I w
1 answers2024-05-11

If you can unscrew it, re-tighten it a little and see if the toilet light is broken

The switch of the light in the living room is broken, and the light does not go out when you press i
9 answers2024-05-11

The switch is short-circuited! The first aid method is to disassemble the switch, and the two-in-one is temporarily controlled with one! Of course, if you have time to go, hurry up and replace it!

If you want to change the lamp, the living room lamp is suitable for the general lamp or the chandel
2 answers2024-05-11

Visual inspection of the owner's living room is quite wide, and at the same time spotlight strips are installed around it, but the floor height is not very high, it should be about meters, and the use of general chain chandeliers will feel a little cramped, and the floor height is a little short. >>>More